De-Wipering
Moderator: Octane2097
-
keyganSRi
- CB-Uk Newbie
- Posts: 4
- Joined: Wed Mar 17, 2010 3:03 am
De-Wipering
HI, i wish to dewiper my corsa b sri, how do i go about doing this??
-
ThyRosh
- CB-Uk User
- Posts: 54
- Joined: Thu Jun 04, 2009 4:57 pm
Re: De-Wipering
aite bowse ;] lol rip it off and put a lil plug in it or use filler i can do it ya nutta lol
Bags Are For Groceries.
-
danthemann
- CB-Uk User
- Posts: 3469
- Joined: Sat Jan 10, 2009 3:42 am
- Location: Reading/Basingstoke area
Re: De-Wipering
simple really..
open ya boot,remove the like panel bit on the inside of the bootlid,then u can access the bolts etc to remove the arm and motor.its easy enough when u actually do it lol
open ya boot,remove the like panel bit on the inside of the bootlid,then u can access the bolts etc to remove the arm and motor.its easy enough when u actually do it lol
corsa b-tick! civic ej9 1.4 sohc-tick! civic coupe ej6 1.6 sohc-tick! CRX 16V 1.6 dohc-tick! MB6 VTI Civic 1.8 DOHC-tick! EK4 Vti-tick! EJ9 Civic-current project!
-
corsamadlad
- CB-Uk User
- Posts: 125
- Joined: Mon May 18, 2009 7:27 pm
- Location: Gravesend
Re: De-Wipering
If going fill it and paint.
Take boot lid cover of, remove wiper arm, dis connect wires, 2-3 bolts holding motor on.
Remove motor and i groud round wiper hole to the metal, welded small peice in the hole, ground welds down.
Fibre glass more rubbin down, filler, primer, paint.
Take u few hrs but it will b good at the end, im currently doing the number plate reses and pasenger door complete handle.
Take boot lid cover of, remove wiper arm, dis connect wires, 2-3 bolts holding motor on.
Remove motor and i groud round wiper hole to the metal, welded small peice in the hole, ground welds down.
Fibre glass more rubbin down, filler, primer, paint.
Take u few hrs but it will b good at the end, im currently doing the number plate reses and pasenger door complete handle.