please help
Moderator: Octane2097
-
- CB-Uk User
- Posts: 70
- Joined: Sun Sep 13, 2009 8:25 pm
please help
what causes oil in the inlet system? its making my car run very lumpy on tickover and smoking a tad, could there be too much oil in and its burning it off?
- duncanpound
- CB-Uk User
- Posts: 449
- Joined: Wed Dec 30, 2009 5:10 pm
- Location: Shropshire/Herefordshire/Worcestershire Borders
Re: please help
could be worn valve stem sealsseals
[size=150][b][color=#008000]Corsa B W Reg[/color][/b][/size]
[color=#008000][u][b]check out my project log[/b][/u][/color] http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=14330
[color=#008000][u][b]check out my project log[/b][/u][/color] http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=14330
- bluecorsab
- CB-Uk User
- Posts: 1075
- Joined: Tue Aug 25, 2009 7:56 pm
- Location: Sleaford, Lincolnshire
Re: please help
most likely cause is either two much oil in the engine or a blocked breather ,leaking valve stem seals will cause it to smoke on the overrun but wont cause oil in the inlet
RED Corsa GSi Owner - Thats one GSi saved from the scrapheap and the pikeys who break them or ruin them with tacky mods
-
- CB-Uk User
- Posts: 70
- Joined: Sun Sep 13, 2009 8:25 pm
Re: please help
found a split in a hose that goes into like a little box on the right hand side of the engine with a red plug something to do with the fuel i believe? maybe solved the problem now? will try later battery on charge, heads been rebuilt with big valves etc so completely new so its gotta be something to do with a air leek i presume, no management light, only occasionaly when revs drop lol but thats when its burning the oil so thatl be o2 sensor clears when revved a tad
-
- CB-Uk Newbie
- Posts: 8
- Joined: Tue May 11, 2010 12:33 am
Re: please help
it could be piston rings gone?
-
- CB-Uk User
- Posts: 70
- Joined: Sun Sep 13, 2009 8:25 pm
Re: please help
dont be saying that!!!
-
- CB-Uk Newbie
- Posts: 8
- Joined: Tue May 11, 2010 12:33 am
Re: please help
sorry dude but i had a 1.6 sport and thats what happend exactly the same thingdude
-
- CB-Uk User
- Posts: 70
- Joined: Sun Sep 13, 2009 8:25 pm
Re: please help
all is well sorted the problem was a split vacum pipe all is well glad its not the rings!!