Been a busy boy today!
Oil Change (look in Hints & Tips - I mande a guide )
Stripped down the Drivers door & replaced the window runners as they were worn/seized & jamming the window down 3/4 way
Stripped down, repaired, cleaned & re-assembled the leccy mirror switch as it wasn\'t working
Completely re-wired my front speakers & found out there a nice set of 130W Pioneer speakers!
Still stuff to do tomorrow, such as strip out the centre console & replace a few bulbs, aswell as sort out some \'damage\' to the edges, and then just clean out & tidy up the car & give it a wash too!
Tis fun when ya off work!
Fun with the GSi today... Just work
- PaulW
- Administrator
- Posts: 1765
- Joined: Tue Oct 19, 2004 10:34 pm
- Location: Winnington/Liverpool
- Contact:
Fun with the GSi today... Just work
All the above comments are deemed an opinion, and in most cases
- PaulW
- Administrator
- Posts: 1765
- Joined: Tue Oct 19, 2004 10:34 pm
- Location: Winnington/Liverpool
- Contact:
Fun with the GSi today... Just work
rust... what rust...
All the above comments are deemed an opinion, and in most cases
- PaulW
- Administrator
- Posts: 1765
- Joined: Tue Oct 19, 2004 10:34 pm
- Location: Winnington/Liverpool
- Contact:
Fun with the GSi today... Just work
there aint no rust on my boot!
All the above comments are deemed an opinion, and in most cases
-
- CB-Uk User
- Posts: 650
- Joined: Thu Dec 02, 2004 2:18 pm
- Location: Newcastle
Fun with the GSi today... Just work
i got two spots of rust on my boot, one big one covered by a sticker and the other one is starting to rust just a little bubble
dont get me started on the rest of the car
dont get me started on the rest of the car
-
- CB-Uk User
- Posts: 376
- Joined: Sun Jan 30, 2005 7:37 pm
- Location: South London::Croydon
- Contact:
Fun with the GSi today... Just work
Its always a good feeling when ye get the little job on your car done!
-
- CB-Uk Newbie
- Posts: 5
- Joined: Sun Jan 30, 2005 11:41 pm
Fun with the GSi today... Just work
What you do to the eleccy mirror switch mine only moves up and down...
Found a switch at a scrappy but the joystick bit is missing. Does the top bit just clip on somehow? if so i\'ll take the joystick off the broken one
Mot is on moday do they check if this switch works?
Found a switch at a scrappy but the joystick bit is missing. Does the top bit just clip on somehow? if so i\'ll take the joystick off the broken one
Mot is on moday do they check if this switch works?
-
- CB-Uk Newbie
- Posts: 5
- Joined: Sun Jan 30, 2005 11:41 pm
Fun with the GSi today... Just work
fixed my mirrors just jiggled the joystick around for ages and kept blowing on it
All set for the MOT now (got a feeling its gonna fail tho)
All set for the MOT now (got a feeling its gonna fail tho)
-
- CB-Uk User
- Posts: 437
- Joined: Fri Jan 14, 2005 7:49 pm
- Location: jamsport
- Contact:
Fun with the GSi today... Just work
liked the pic you send me dude! was nice to see the stripage! as for rust, i removed my rear wiper yesterday to find a huge patch of rust