ISO On Corsa

coollg · Post by **coollg** » Fri Apr 08, 2005 5:54 pm

Hi

as u know i removed the old radio a while ago and replaced with a tempary goodmans cd player since installed this ive noticed it just keep its memory, and so changes all my settings back to default, i have simply pluged the iso on the cd player into the iso block which was part of the stock bracket system sfor the radio, do i need to get a iso adpator , or is this just the cd players fualt.

Or in other words do corsa iso have the same leads in the same place or not.

Kind reagard Lee

lee_corsa · Post by **lee_corsa** » Fri Apr 08, 2005 5:57 pm

no idea mine had iso as standard

coollg · Post by **coollg** » Fri Apr 08, 2005 6:02 pm

mine had this like bracket thing that i basically pulled out had like a block of 3 connectors

coollg · Post by **coollg** » Fri Apr 08, 2005 6:13 pm

ok heres a p[ic of wht i mean

the connecter i am holding goes into the headunit, the other part was wht the origanl vauxhall radio was connected to with in the bracket

heres the headunit for u to luagh at

it was free though

sach · Post by **sach** » Fri Apr 08, 2005 7:22 pm

swap the yellow and red wire around.

coollg · Post by **coollg** » Fri Apr 08, 2005 7:31 pm

:S red n yellow ??? the two yellows are speakers one

sach · Post by **sach** » Fri Apr 08, 2005 10:13 pm

power wires

coollg · Post by **coollg** » Fri Apr 08, 2005 11:03 pm

is that something to do with the ignition and +12

so rather thenhave power go into the unit when ignition , power will be there all the time if im rite

lozzy_corsa · Post by **lozzy_corsa** » Sat Apr 09, 2005 1:42 am

yup they should have to bullet connectors swap them over and it will be good and dandy !

coollg · Post by **coollg** » Sun Apr 10, 2005 12:42 am

just wodnering

im plainign to upgraed front speaker.

i need to get those adpators

justwondering once ive fitted the new speakers, will i be able tp put the side bicket thing bk on and not see the spakers.