fitting rear springs
Moderator: Octane2097
-
bigandy91
- CB-Uk Newbie
- Posts: 16
- Joined: Thu Apr 15, 2010 11:38 pm
- Location: Dumfries, Scotland
fitting rear springs
i bought 40mm jamex springs and installed them, but am still unsure if the rear one are upside down or not, its says on the leaflet "do not insert wrong way up" but does not state the correct way (blonde) anyone know if it maters or what?????????????????????????????
-
donnay1991
- CB-Uk User
- Posts: 519
- Joined: Thu May 27, 2010 1:24 pm
- Location: Angus, Scotland
Re: fitting rear springs
It does matter. but when u put them in place you will easily realise if there wrong. one way the sit perfect in the bottom mounts. Other way they dont curl round the mount properly. if yours are wrong id suggest changing them about to be on the safe side.
Corsa B 1999 1.2 16v,
Debadged, Lowered 40 mm front and back 60mm,angel eyes with standard rears, Smoked Side Repeaters, Drilled airbox (Shredded). 4" Sportex Backbox with sportex straight through centre pipe. Graphite grey cesaros.
Debadged, Lowered 40 mm front and back 60mm,angel eyes with standard rears, Smoked Side Repeaters, Drilled airbox (Shredded). 4" Sportex Backbox with sportex straight through centre pipe. Graphite grey cesaros.
-
bigandy91
- CB-Uk Newbie
- Posts: 16
- Joined: Thu Apr 15, 2010 11:38 pm
- Location: Dumfries, Scotland
Re: fitting rear springs
ok, its cuz i heard a knocking, i changed them round, but it didnt solve it, must be my exsuast lol, thanks bud
-
donnay1991
- CB-Uk User
- Posts: 519
- Joined: Thu May 27, 2010 1:24 pm
- Location: Angus, Scotland
Re: fitting rear springs
could be ur exhaust bangn off of ur rear beam
Corsa B 1999 1.2 16v,
Debadged, Lowered 40 mm front and back 60mm,angel eyes with standard rears, Smoked Side Repeaters, Drilled airbox (Shredded). 4" Sportex Backbox with sportex straight through centre pipe. Graphite grey cesaros.
Debadged, Lowered 40 mm front and back 60mm,angel eyes with standard rears, Smoked Side Repeaters, Drilled airbox (Shredded). 4" Sportex Backbox with sportex straight through centre pipe. Graphite grey cesaros.
-
bigandy91
- CB-Uk Newbie
- Posts: 16
- Joined: Thu Apr 15, 2010 11:38 pm
- Location: Dumfries, Scotland
Re: fitting rear springs
rear beam?
-
donnay1991
- CB-Uk User
- Posts: 519
- Joined: Thu May 27, 2010 1:24 pm
- Location: Angus, Scotland
Re: fitting rear springs
Axle
Corsa B 1999 1.2 16v,
Debadged, Lowered 40 mm front and back 60mm,angel eyes with standard rears, Smoked Side Repeaters, Drilled airbox (Shredded). 4" Sportex Backbox with sportex straight through centre pipe. Graphite grey cesaros.
Debadged, Lowered 40 mm front and back 60mm,angel eyes with standard rears, Smoked Side Repeaters, Drilled airbox (Shredded). 4" Sportex Backbox with sportex straight through centre pipe. Graphite grey cesaros.
-
duncanpound
- CB-Uk User
- Posts: 449
- Joined: Wed Dec 30, 2009 5:10 pm
- Location: Shropshire/Herefordshire/Worcestershire Borders
Re: fitting rear springs
everyone says their exhaust rattles when they lower their cars, mine tapps lightly on the rear chassis bit but its now lowered about 70mm and it still doesnt catch the axle :/
[size=150][b][color=#008000]Corsa B W Reg[/color][/b][/size]
[color=#008000][u][b]check out my project log[/b][/u][/color] http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=14330
[color=#008000][u][b]check out my project log[/b][/u][/color] http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=14330
-
bigandy91
- CB-Uk Newbie
- Posts: 16
- Joined: Thu Apr 15, 2010 11:38 pm
- Location: Dumfries, Scotland
Re: fitting rear springs
iv got a standard exsuast on at the moment, got a full sytem orderd so it ma stop it