1.4 Corsa SRI Project (Picture Heavy)

For New & Continuing Projects Only.
NOT for past projects or questions.
User avatar
Grant_j
CB-Uk Newbie
Posts: 44
Joined: Fri Aug 06, 2010 9:27 pm
Location: Cumbria, UK

1.4 Corsa SRI Project (Picture Heavy)

Post by Grant_j »

Ok, got the car quite cheaply.. ok for nothing! It was an MOT failure, it failed on the sill (corroded) which has been welded, The drivers side front and back suspension was snapped (Replaced with lowering springs 40mm) The washer jets didn't work (easily sorted). and it only cost me £20 to have it delivered!

Here it is when i first got it,
Image

Here it is next to my first ever corsa,

Image

Now, a lot of people will like the next photo, a lotta people wont opinions vary.
-Jap style bodykit
-15" Unisport Alloys
Not yet lowered in this photo.

Image

Alloys Fitted:

Image

More pics coming soon people
User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: 1.4 Corsa SRI Project (Picture Heavy)

Post by nath2905 »

the wheels look smart, u just need a pic with the car and wheels, but like you say people will and wont like that bumper, i dont it looks too big for the size of the car, but thats my opinion, nice car tho :)
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
Grant_j
CB-Uk Newbie
Posts: 44
Joined: Fri Aug 06, 2010 9:27 pm
Location: Cumbria, UK

Re: 1.4 Corsa SRI Project (Picture Heavy)

Post by Grant_j »

Cheers bud, will have more pics soon though which has had a bit more work done to it :)
adz01992
CB-Uk User
Posts: 96
Joined: Tue Feb 02, 2010 7:01 pm
Location: North Yorkshire
Contact:

Re: 1.4 Corsa SRI Project (Picture Heavy)

Post by adz01992 »

No i like as long as you don't put a dustbin lid exhaust and lex'arse' lights it could look good is it a full body kit and does it have spoiler ??? and really like the alloys :)
User avatar
Grant_j
CB-Uk Newbie
Posts: 44
Joined: Fri Aug 06, 2010 9:27 pm
Location: Cumbria, UK

Re: 1.4 Corsa SRI Project (Picture Heavy)

Post by Grant_j »

hey mate, it is a full bodykit, front & rear bumpers, side skirts and wider wheel arches. i have no plans for a new exhaust but was thinking of getting one of those tips that go on the end and it currently has a sri spoiler on it but as of tomorrow it will have a furious 2 spoiler. It is a Corsa b 1.4 SRI so interior is good. I'm also thinking of smoked back lights but what do you think? Cheers for the comment :) will post more pics up soon peeps
User avatar
Grant_j
CB-Uk Newbie
Posts: 44
Joined: Fri Aug 06, 2010 9:27 pm
Location: Cumbria, UK

Re: 1.4 Corsa SRI Project (Picture Heavy)

Post by Grant_j »

Ok, went out today and took some more photos how it stands.

Lowered 40mm:
Image

Started to colour code some of the interior:
Image

..
Image

Decided just to buy an exhaust tip for now, i do have a jap style back box and 6" big bore but not at this moment!:

Image

A few more pics:

Image

To be debadged:

Image

Wheel arches and side skirts to go on:

Image

Image

Dunno whether to glue this on?

Image

Needs a good clean, can see some polish from last time i never wiped off, some fading and rest of bodykit fitting properly (Screwed on with screws TEMPORARILY). Maybe dewiper it, smoked lights, angel eyes.. What do you think?
adz01992
CB-Uk User
Posts: 96
Joined: Tue Feb 02, 2010 7:01 pm
Location: North Yorkshire
Contact:

Re: 1.4 Corsa SRI Project (Picture Heavy)

Post by adz01992 »

Right i think if you change the spoiler and put your 6 foot wide exhaust on or whatever it is you will RUIN a very good car i think if you are putting wide arch body kit on you should maybe get wheel spacers :) Also get them badges off and personally i think it would make such a difference to the back end if you smoothed the boot i would also color code everything door handles the black bits that are still on the mirrors scuttle pannel everything :) but then it would look quite nice i like the body kit and thats unusual for corsa's
User avatar
Grant_j
CB-Uk Newbie
Posts: 44
Joined: Fri Aug 06, 2010 9:27 pm
Location: Cumbria, UK

Re: 1.4 Corsa SRI Project (Picture Heavy)

Post by Grant_j »

Hiya mate, im not putting the exhaust on, im just putting the tip on which is on the photos above. I am getting round to colour coding it and debadging is next on my list. Not sure if i could manage to smooth it but i'm going to look out for one already done that i can buy. Cheers for your comment mate.. I will upload more pics soon of what ive done.
User avatar
Grant_j
CB-Uk Newbie
Posts: 44
Joined: Fri Aug 06, 2010 9:27 pm
Location: Cumbria, UK

Re: 1.4 Corsa SRI Project (Picture Heavy)

Post by Grant_j »

Ok mate, got it outta the garage today after swapping back boot from my old corsa (better cond & had no spoiler on so was easier) then i put rear shocks back on, fitted the spoiler i just bought then brought it out to take pics.. Here it is as it stands

Image

Image

Image

(Phone pic below)

Image

I then couldn't resist taking a little sneak hear of what my exhaust may sound like as i got a new exhaust today (new to me) its about 2.5" reasonable shape and sounds ok,not too loud and doesn't look like a dustbin.

you might lol at the next pic :)

Image

and this one..

Image

Obv it was blowing as it wasn't sealed but i shall be fitting it tomorrow and i don't know what else is on my list as of yet..
:)
User avatar
Grant_j
CB-Uk Newbie
Posts: 44
Joined: Fri Aug 06, 2010 9:27 pm
Location: Cumbria, UK

Re: 1.4 Corsa SRI Project (Picture Heavy)

Post by Grant_j »

Ok, little update, dragged the wheel arch trims out of the garage today,

i first drilled and countersunk them:

Image

Then i got a little distracted with the interior and finally managed to get the center console out:

Image

Then sprayed it..

Image

i haven't put it back in yet as it was still tacky, i've also took out the door handle surrounds to be sprayed.. haven't figured out how the heater surrounds come out yet any help?

I forgot to show y'all that i fitted the exhaust eventually :D

Image

i put the trims on temporarily with 2 screws just for now..

Image

Image

Image

Image

Image

Image

Image

i might also add that i got a little carried away with photos, a lot of hard work went into painting them wheel arch pieces and cutting & shaping them.. the hardest part will be fitting it all properly.. Let me know what y'all think so far people :D
fatboi567
CB-Uk User
Posts: 212
Joined: Mon May 25, 2009 11:57 pm

Re: 1.4 Corsa SRI Project (Picture Heavy)

Post by fatboi567 »

Nice car blad, looks propa gangsta, luvin' tha bodykit it's smart as chips! Goes well good wif the cossie stylie spoiler on the back.

Love it blad, brap 8)
Drive it like you stole it!!

Then when it breaks, push it like you stole it!!!!
User avatar
Grant_j
CB-Uk Newbie
Posts: 44
Joined: Fri Aug 06, 2010 9:27 pm
Location: Cumbria, UK

Re: 1.4 Corsa SRI Project (Picture Heavy)

Post by Grant_j »

ROFL fatboi, made my day lol..

anyway,

I haven't really done much since the last update just give it a clean and put the center console in will be doing more on it soon so will get more pics :)

Thanks to everyone so far
User avatar
Timmeh
CB-Uk User
Posts: 80
Joined: Thu Apr 15, 2010 6:02 pm
Location: Northfield, Birmingham

Re: 1.4 Corsa SRI Project (Picture Heavy)

Post by Timmeh »

Wow this car should come with a parental advisory notice, its the corsa from hell lol, scary poo! Not to my taste in the slightest though im afraid, but whats with the mesh on the front bumper? Needs tidying that, will make a big difference to the general presentation of Lucifers hatchback
Pre-facelift Bumpers FTW!
User avatar
Grant_j
CB-Uk Newbie
Posts: 44
Joined: Fri Aug 06, 2010 9:27 pm
Location: Cumbria, UK

Re: 1.4 Corsa SRI Project (Picture Heavy)

Post by Grant_j »

lol mate you dont need to lecture me, i like it.. you might not, i dont particularly like yours but im not gona post a load of unuseless rubbish on your thread
brebaz
CB-Uk User
Posts: 65
Joined: Wed Dec 02, 2009 6:07 am
Location: hexham, northumberland

Re: 1.4 Corsa SRI Project (Picture Heavy)

Post by brebaz »

what happened to your own forum mate? it doesn't work
Post Reply