HELP please :)

Help and advice section for technical questions on your Corsa.
Please check that your query hasn't already been answered in FAQ and Technical Info section.

Moderator: Octane2097

Post Reply
User avatar
dandadan
CB-Uk User
Posts: 294
Joined: Sat Nov 21, 2009 12:56 am
Location: Lancashire

HELP please :)

Post by dandadan »

Orite lads,

I need a new ecu for my car but theres two codes on the ecu so which code is it I need to match?

My ecu codes= 16213759 & D95031
Ecu I can buy codes= 16213759 & 001621

Would this ecu work on mine or not?

Cheers

Dan
Drive it like you stole it
Top
User avatar
dandadan
CB-Uk User
Posts: 294
Joined: Sat Nov 21, 2009 12:56 am
Location: Lancashire

Re: HELP please :)

Post by dandadan »

bump
Drive it like you stole it
Top
User avatar
dandadan
CB-Uk User
Posts: 294
Joined: Sat Nov 21, 2009 12:56 am
Location: Lancashire

Re: HELP please :)

Post by dandadan »

Anyone?
Drive it like you stole it
Top
User avatar
PRICER
CB-Uk User
Posts: 3510
Joined: Sun May 10, 2009 9:21 pm
Location: ludlow shropshire

Re: HELP please :)

Post by PRICER »

personally i wouldnt just change the ECU, because your chip inside your key will probably be different to, so your best bet is to get the whole lot ecu, chip and responder? i think... not sure if you need this but you might,
TURBO LAG IS JUST FOREPLAY ;)

2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
Top
User avatar
bluecorsab
CB-Uk User
Posts: 1075
Joined: Tue Aug 25, 2009 7:56 pm
Location: Sleaford, Lincolnshire

Re: HELP please :)

Post by bluecorsab »

what engine is it for?
RED Corsa GSi Owner - Thats one GSi saved from the scrapheap and the pikeys who break them or ruin them with tacky mods :D
Top
User avatar
dandadan
CB-Uk User
Posts: 294
Joined: Sat Nov 21, 2009 12:56 am
Location: Lancashire

Re: HELP please :)

Post by dandadan »

yeah I do need all 3 as there coded together. What I need to know is if any ecu from a 1.4 16v corsa b will fit. Each ecu has different numbers and codes on them to do with software updates etc. I have found one which has 32 pins in each connector and my car has 32 pins in each plug so I am hoping it will work, I just wanted if the codes had to match

x14xe
Drive it like you stole it
Top
User avatar
dandadan
CB-Uk User
Posts: 294
Joined: Sat Nov 21, 2009 12:56 am
Location: Lancashire

Re: HELP please :)

Post by dandadan »

got an ecu, transponder and reciever, all the codes were different to mine but both sockets in the ecu had 32 pins just like mine, plugged it in and my car started straight away. Happy days, now the work can commence, I will try do a project log asap :)

Cheers guys
Drive it like you stole it
Top
Post Reply

Return to “Corsa General Help”