Thinking about inserting a 1.6
Moderator: Octane2097
-
- CB-Uk Newbie
- Posts: 23
- Joined: Sat Jun 19, 2010 1:24 pm
Thinking about inserting a 1.6
Hi there guys,
Sometime next year im thinking about upgrading my cars engine, im thinking about a 1.6, can anyone give me advice?
Is it a bad idea to upgrade the rest of your car a bit at a time before you put in the engine, for example, save up and get the brakes done, then save up and get other bits and pieces done, i have already got suspension on it but i dont know what else needs upgraded?
What engine would be be best for this? i know theres a few types of 1.6's, and can you get new engines to fit the corsa b? because getting good old ones can be a nightmare?
Thanks
Craig
Sometime next year im thinking about upgrading my cars engine, im thinking about a 1.6, can anyone give me advice?
Is it a bad idea to upgrade the rest of your car a bit at a time before you put in the engine, for example, save up and get the brakes done, then save up and get other bits and pieces done, i have already got suspension on it but i dont know what else needs upgraded?
What engine would be be best for this? i know theres a few types of 1.6's, and can you get new engines to fit the corsa b? because getting good old ones can be a nightmare?
Thanks
Craig
-
- CB-Uk Newbie
- Posts: 39
- Joined: Thu Jul 15, 2010 9:42 pm
Re: Thinking about inserting a 1.6
redtop it or 2l 8v calibra engine as for the 1.6 im not sure but if u are going from a 16v to an 8v or the other way round i think the engine mounts are diff wot u got in it at the moment
-
- CB-Uk Newbie
- Posts: 23
- Joined: Sat Jun 19, 2010 1:24 pm
Re: Thinking about inserting a 1.6
At the moment i have a 1.2 16v i dont want to put the 2L in it because i have so many friends who have had them fitted and it just destroys the car, they are in getting parts repaired all the time, im going to get the engine fitted proffesionally tho, its not gna be a DIY job, and a 1.6 will be slightly cheaper to run too but still fairly quick
- dandadan
- CB-Uk User
- Posts: 294
- Joined: Sat Nov 21, 2009 12:56 am
- Location: Lancashire
Re: Thinking about inserting a 1.6
how about the x16xe.
If you can afford the brake conversion at the same time I would just get it all done at the same time if not then I would deffo upgrade the brakes 1st. You may also need to get some welding done to strengthen the car aswel
If you can afford the brake conversion at the same time I would just get it all done at the same time if not then I would deffo upgrade the brakes 1st. You may also need to get some welding done to strengthen the car aswel
Drive it like you stole it
- bluecorsab
- CB-Uk User
- Posts: 1075
- Joined: Tue Aug 25, 2009 7:56 pm
- Location: Sleaford, Lincolnshire
Re: Thinking about inserting a 1.6
a 2 litre conversion does not destroy the car IF ITS DONE PROPERLY!!!
RED Corsa GSi Owner - Thats one GSi saved from the scrapheap and the pikeys who break them or ruin them with tacky mods
-
- CB-Uk Newbie
- Posts: 39
- Joined: Thu Jul 15, 2010 9:42 pm
Re: Thinking about inserting a 1.6
me and my brother put a 2L 8v calibra engine in his sri he dont have much of a clue bout cars n i no a bit we did it on the road side , we had to wire a few bits this was all done prop and its very nippy and he has had no probs with it. i have now got to go and help him change that engine for a redtop next week as bluecorsa said if u do it properly they r fine
- dandadan
- CB-Uk User
- Posts: 294
- Joined: Sat Nov 21, 2009 12:56 am
- Location: Lancashire
Re: Thinking about inserting a 1.6
I have never known them destroy a car like bluecorsab said. My mate has just put a 2l redtop in his nova and it looks and drives amazing with no problems. He spent quite abit on welding to strengthen the chassis, other than that it was pretty straight forward. With the know how, the right tools and some confidence it can be done in a weekend easy, if you know what your doing, a day
Drive it like you stole it
- bluecorsab
- CB-Uk User
- Posts: 1075
- Joined: Tue Aug 25, 2009 7:56 pm
- Location: Sleaford, Lincolnshire
Re: Thinking about inserting a 1.6
as for welding the shell to strengthen it there is no need as the standard corsa shell is well strong enough unless you are going to turbo it . people seem to think you have to go down the same route as you did with the nova but its not the case as a rotten corsa is still stronger than a nova ever was
RED Corsa GSi Owner - Thats one GSi saved from the scrapheap and the pikeys who break them or ruin them with tacky mods
-
- CB-Uk Newbie
- Posts: 23
- Joined: Sat Jun 19, 2010 1:24 pm
Re: Thinking about inserting a 1.6
the 2.0L is pretty thirsty though is it not?
-
- CB-Uk Newbie
- Posts: 23
- Joined: Sat Jun 19, 2010 1:24 pm
Re: Thinking about inserting a 1.6
Also is it possible to get the rear drums converted into disks? if so is it a big job? is it expensive?
- bluecorsab
- CB-Uk User
- Posts: 1075
- Joined: Tue Aug 25, 2009 7:56 pm
- Location: Sleaford, Lincolnshire
Re: Thinking about inserting a 1.6
no the 2 litre is not thirsty, mine will do 35mpg all day long and disk conversion is doo able, google it
RED Corsa GSi Owner - Thats one GSi saved from the scrapheap and the pikeys who break them or ruin them with tacky mods
-
- CB-Uk Newbie
- Posts: 23
- Joined: Sat Jun 19, 2010 1:24 pm
Re: Thinking about inserting a 1.6
Is tht the REDTOP? also can you get them newish? i dnt want one thts had the balls booted out of it
- bluecorsab
- CB-Uk User
- Posts: 1075
- Joined: Tue Aug 25, 2009 7:56 pm
- Location: Sleaford, Lincolnshire
Re: Thinking about inserting a 1.6
no mine isnt a redtop its a x20xev, and you cant get a redtop new to be honest unless you brougth one from a specialist that had a factory rebuild, thats why i chose the engine i did as its newer
RED Corsa GSi Owner - Thats one GSi saved from the scrapheap and the pikeys who break them or ruin them with tacky mods
-
- CB-Uk Newbie
- Posts: 23
- Joined: Sat Jun 19, 2010 1:24 pm
Re: Thinking about inserting a 1.6
The letters mean nothing to me lol, i dnt know much about car engines i spend a lot of time fussing over bodywork, the thing is a lot of these kind of engines have had the balls booted out of them so are probz f**k lol its getting a good one thts a problom
- PRICER
- CB-Uk User
- Posts: 3510
- Joined: Sun May 10, 2009 9:21 pm
- Location: ludlow shropshire
Re: Thinking about inserting a 1.6
thats why everyone who wants a redtop buys one thats complete, strips them down and re-builds them from the bottom up.
TURBO LAG IS JUST FOREPLAY
2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]