my new project arden blue corsa b.

[unitedstomper]

hi all not been on in a while as i had some bad news about the red corsa sport i bought it needs jigging its bent the chassis where the bottom arm goes on and a slight bend on the rear axel so after deciding not to get it jigged i have bought another corsa im gunna swap all the bits over including the 1.4 16v engine i am gunna be doing all the spray work myself as im pretty good at it.!
and time to start saving for my 2.0 engine.?
i have already put some new wheels on there tsw modena 195/45/17 what i want to know is how low can i go with 17`z on.??

have sprayed my eyebrows and the plastic boot opener.?
will upload some pics later
any comments welcome
ste

[unitedstomper]

hello again would of uploaded some pics but cant find my adaptor .so does anyone know how low i can go with the 17`s on as the red corsa i have has all the lowering kit but that has 16`s on.??there are pics of the red one on here
and i plan on changing this over to the blue one.
any 2.0 engines for sale please pm me as i dont want the 1.4 16v in for long lol

[jordyp]

you cant really go that low on 17's as there mostly the wrong offset, your better off gettin some 15's or if you want 16's get cav/calibra turbo alloys but you need to get 5 stud hubs discs and rear disc conversion, and go on corsa sport or migweb theres loads of them on there, or get a doner car mate

[unitedstomper]

so i have finally found my lead for the camera have done a few bits and got some pics for yas.
so here goes this is the beast lol
<img src="http://api.photoshop.com/home_552e7c1d8 ... fb4f6c7fae" width="2592" height="1456"/>
<img src="http://api.photoshop.com/home_552e7c1d8 ... 89368f002a" width="2592" height="1456"/>

before i changed the lights and grille
<img src="http://api.photoshop.com/home_552e7c1d8 ... 703c59de83" width="2592" height="1456"/>
and after
<img src="http://api.photoshop.com/home_552e7c1d8 ... 884a44dc05" width="2592" height="1456"/>
this was the interior it now has the bucket seats in will get a pic of them 2moz
<img src="http://api.photoshop.com/home_552e7c1d8 ... 0d898a0af3" width="2592" height="1456"/>
my next plan is to give my eyebrows and boot opener one more coat then laquer then fit
<img src="http://api.photoshop.com/home_552e7c1d8 ... 054384d55e" width="2592" height="1456"/>
<img src="http://api.photoshop.com/home_552e7c1d8 ... d40fb9fa57" width="2592" height="1456"/>
any comments and advice welcome thanks for looking ste

[unitedstomper]

ohh no why is it not showing my pics.???

[M4RSH4LL]

use something like http://imageshack.us/ and then were the

is copy that code in

like this ^^^^

Uploaded with ImageShack.us
^^^^^make sure u delete^^^^^^ unless u wanna keep it ( i dont see point )

[unitedstomper]

here we go al try again
this is the beast


Uploaded with ImageShack.us


Uploaded with ImageShack.us
changed the lights for the depo`s and the grille


Uploaded with ImageShack.us

will be laquering the eyebrows and boot opener tonight this is 3 coats


Uploaded with ImageShack.us


Uploaded with ImageShack.us

will upload some more later
any comments and ideas welcome thanks

[unitedstomper]

so having changed over what i can im now in the process of taking all the electric windows and mirrors out to put in the blue one has anyone ever done this and how hard do you think it will be.??
ste

[matty101]

shud be easy, as long as you have the wires already there in the door plug. if not you will haveto wire them in which might be a pain.

read this:
http://www.corsasport.co.uk/board/viewt ... tid=129537

[PRICER]

off if you havent got the wires in the car side of it for the lecky windows etc, then you can swap your whole rear loom with that of the blue one, and that replaces the door plugs aswell because i helped duncanpound on here to do it to his corsa.

[unitedstomper]

off if you havent got the wires in the car side of it for the lecky windows etc, then you can swap your whole rear loom with that of the blue one, and that replaces the door plugs aswell because i helped duncanpound on here to do it to his corsa.

thanks for that monday i will be checking doorcards off to see whats behind there

ste

[PRICER]

you dont have to take the door cards off you only have to split the rubber connector bit thats between the door and the body, if they have the same amount of wires in the same place then it will be an straight forward swap, if it isnt then you'l have to change the rear looms.

[unitedstomper]

ohh right im with you now
how hard will it be getting the motor out and in .??
ste

[matty101]

there riveted in so u need to drill the rivets to get them out and obvisously a rivot gun and some 8mm (i think) rivots to put them bac in

[PRICER]

or some small bolts, thats what we used on duncans