Rev counter

[matius576]

i have a 1.2 with no rev counter would it be posible and if possible how time consuming to make it compatible with a rev couner from another corsa?
thanks in advance
matt

[matty101]

check the FAQ

[boarderjaymee]

i have a 1.0ltr corsa with no rev counter, and just the other day put a whole new speedo unit in, with a rev counter, and it just worked straight away.

[dinglec20xe]

check the FAQ

i done this and it says that the clocks should work with no wiring what so ever, but mine dont? ive got the correct ones EVERYTHING works bar the rev counter? i added a signal wire from the alternator and it now works, so i think that sitcky needs to be changed

[boarderjaymee]

thats odd lol, coz i just done a straight swap and it just worked lol

[Adam-D]

most work straight away/
not sure on connecting it to the alt thou.....

[dinglec20xe]

does the job? its accurate according to our live data reading on our diagnostics machine

[kevs14sport]

i have a 1.2 with no rev counter would it be posible and if possible how time consuming to make it compatible with a rev couner from another corsa?
thanks in advance
matt

matt i had a N reg 1.2 corsa a few years ago, i looked into putting standard clocks in with rev counter and apparantly there is a wire missing from the far left on some of them mine was missing so i never bothered, just got a corsa with a rev counter all ready in LOL, i think i would have had to lead a wire from the dizzy to get a signal to the rev counter, are both your clocks a manual speedo??
kev

[matius576]

if im honest i don't know ive not got them out yet, my engine don't got a dizzy cap

[PRICER]

you just extend the pea green wire from down next to the ECU, theirs a plug that joins all connects to the inside dash loom, and a pea green will be going into it and on some corsa's not coming out, and this is what you need to extend to up behind your dials ON SOME MODELS on others the pea green wire is already installed.

[matius576]

ok cheers buddy itl be after crimbo now tho