rh cups ET45

Got anything you want to sell? Please post details in here!
Post Reply
User avatar
roperstun
CB-Uk User
Posts: 1455
Joined: Mon Feb 16, 2009 10:18 pm
Location: newport shropshire

rh cups ET45

Post by roperstun »

Here for sale are my RH cups that i had imported from germany.
they are 14"x7" and have an ET of 45 PCD 4x100
all are fitted with 185/55/14 tryes there a german brand that i forgot to note down so will update tomorrow with brand with loads of thread left
the dishes are polished and the spokes are vauxhall ultra blue (previously flame red).
also have all four centre caps

one of the polished dishes has a mark on it
all four wheels have a tiny bit of red showing between the dish and spokes but can easily be removed with some paint thinner and is not obvious inless very close.
two wheels have a little patch where they have gone back to the primer where they got knocked with a wheel bolt.
theres some small laquer runs but some wet and dry should remove them

i have to tried to be as honest as i can and have tryed to picture all the above bits.

first wheel
Image
Image
Image

second wheel
Image
Image
Image

third wheel
Image
(theres not that much red its the flash off the camera)
Image
Image

forth wheel
Image
Image
Image
Image

how they looked

Image
Image

Price: £200

Location: Shropshire
[size=150][color=#4080BF] PVS next year?

i think so :) [/color][/size]
robeuro
CB-Uk Newbie
Posts: 4
Joined: Mon Nov 01, 2010 11:03 pm

Re: rh cups ET45

Post by robeuro »

Swap for set of 4 black pirelli alloys with black and white check centre cap? :)
Post Reply