I am currently experiencing problems with my corsa and to fix this i need to take my EGR valve off and give it a thorough clean. So far i have removed a few of the screws but now I am stuck on how to get the rest off, I AM GETTING DESPERATE!
If someone has a simple step by step guide with pictures it would be hugely appreciated!!!!
BTW this is on a 1999 corsa 1.2 16v
PLEASE HELP!!!!!!
Moderator: Octane2097
-
matty101
- Senior Moderator
- Posts: 2961
- Joined: Thu May 28, 2009 8:54 pm
- Location: Hexham
Re: PLEASE HELP!!!!!!
done this on the same car and tbh its a pain in the arse to do although it is pritty straight forward. empty the coolant, unplug the egr wires. then remove all the torx bolts that hold the egr in place and pull it off. not alot to it, its jst a pain in the arse to get to.
OFFICAL DVLA DATA:
1414 - corsa gsi's on the road in 2008.
735 - corsa gsi's currently on the road and 436 SORN
Basicly you would have to be a right tw*t to break one for parts
Thanks to everyone for an awsome weekend at pvs!
1414 - corsa gsi's on the road in 2008.
735 - corsa gsi's currently on the road and 436 SORN
Basicly you would have to be a right tw*t to break one for parts
Thanks to everyone for an awsome weekend at pvs!
-
ianwilliams_5
- CB-Uk Newbie
- Posts: 22
- Joined: Sat Aug 15, 2009 10:59 pm
Re: PLEASE HELP!!!!!!
I've removed all the bolts, it's just removing the wires which are really tricky
Any advice on how to do that part?
Any advice on how to do that part?
-
PRICER
- CB-Uk User
- Posts: 3510
- Joined: Sun May 10, 2009 9:21 pm
- Location: ludlow shropshire
Re: PLEASE HELP!!!!!!
their is only one, and its a plug. should just flick out the top
TURBO LAG IS JUST FOREPLAY 
2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
-
ianwilliams_5
- CB-Uk Newbie
- Posts: 22
- Joined: Sat Aug 15, 2009 10:59 pm
Re: PLEASE HELP!!!!!!
i've removed the plug from the top its the pipes which i cant seem to remove