fitting gsi side skirts sunday, any hints and tips welcome

BAD ASS CORSA · Post by **BAD ASS CORSA** » Fri Apr 15, 2005 8:01 pm

Make sure you have everything you need before you start. Make sure you get them level, lol.

Post by **PaulW** » Fri Apr 15, 2005 8:22 pm

they proper vauxhall jobbies which clip on, or replicas??

if there the vauxhall ones, get the clips & use a sprit level to get them on straight & also make sure there at the right distances...

your gona need GSi arches too so they dont look out of place & wrong!

Replicas, use some tiger-seal or something to glue them on & they \'should\' stick ok, but keep them level as said!

Dan_Corsa · Post by **Dan_Corsa** » Sat Apr 16, 2005 1:02 am

Also, under each jacking point put a self tapping screw into the body work stop them dropping off like i found as mine flew off last week on the A1

BAD ASS CORSA · Post by **BAD ASS CORSA** » Sat Apr 16, 2005 10:39 am

[quote=\"PaulW\"]if there the vauxhall ones, get the clips & use a spirit level to get them on straight & also make sure there at the right distances...

your gonna need GSi arches too so they don\'t look out of place & wrong!
quote]

Spirit level, don\'t make me laugh. What if the car is lower at one end or is on un-even ground.
Are GSI arches any different to normal ones.

large-sri · Post by **large-sri** » Sat Apr 16, 2005 2:19 pm

nice tips people!

i got standard arches so i will haft to ddoctor them to fit. anyone know of a good water proofing bond to stick thing together?? i was gonna get some no more nails or some thing like that!

BAD ASS CORSA · Post by **BAD ASS CORSA** » Sat Apr 16, 2005 8:56 pm

Why would you wanna spend more cash or GSI arches that you don\'t need. If your colour codding then they need to be smooth anyway plus it never hurt anyone to play a little doctors and nurses.