mornin. some of you may remember me with the 1.2 corsa that lost power well some nice person stole it b4 i managed to sort the problem i now have a 1.4 nice little one loved it until yesterday. all of a sudden i have no indicators or radio and the time and date go off untill you put the hazards on then you have everything also the drivers side rear light has gone out along with the numberplate light any ideas people cuz i use it for work and im now having to walk???? any info greatly recived regards
colin
here we go again!!!!!
-
- CB-Uk User
- Posts: 741
- Joined: Tue Feb 17, 2009 2:04 pm
- Location: Stafford
Re: here we go again!!!!!
sounds like a wiring loom problem or a fuse issue to me
quickest one to check is the fuses - see if they are all working and replace any blown ones then if that dont sort it then its something much worse going on
quickest one to check is the fuses - see if they are all working and replace any blown ones then if that dont sort it then its something much worse going on
- matty101
- Senior Moderator
- Posts: 2961
- Joined: Thu May 28, 2009 8:54 pm
- Location: Hexham
Re: here we go again!!!!!
check and clean your earths mate. if that or the fuse's dont work then you need to start inspecting your loom for someting shorting out, or a loose connection etc.
OFFICAL DVLA DATA:
1414 - corsa gsi's on the road in 2008.
735 - corsa gsi's currently on the road and 436 SORN
Basicly you would have to be a right tw*t to break one for parts
Thanks to everyone for an awsome weekend at pvs!
1414 - corsa gsi's on the road in 2008.
735 - corsa gsi's currently on the road and 436 SORN
Basicly you would have to be a right tw*t to break one for parts
Thanks to everyone for an awsome weekend at pvs!
-
- CB-Uk Newbie
- Posts: 6
- Joined: Tue Oct 20, 2009 10:08 pm
Re: here we go again!!!!!
right been out n had a play changed some fuses and hey presto it worked that was untill i put my brakes on n then pop straight off again???? anyone got an idea with this one?
-
- CB-Uk Newbie
- Posts: 6
- Joined: Tue Oct 20, 2009 10:08 pm
Re: here we go again!!!!!
also jus been put n put a 30a fuse in the slot that keeps blowing to see what happens so when you put your foot on the break all the lights go dim and the fanbelt starts slipping jus to bring you upto date with where i am
- jacobyte
- CB-Uk User
- Posts: 331
- Joined: Thu Sep 16, 2010 11:35 pm
- Location: Bradford
Re: here we go again!!!!!
Sounds as though you have a short somewhere but don't understand why fan belt starts slipping ?
-
- CB-Uk User
- Posts: 177
- Joined: Tue Jun 08, 2010 10:07 pm
Re: here we go again!!!!!
Sounds like a short make sure your earth are connected properly i had this trouble with my old motorbike ( same differance )..
Rip Roaring Dan...
Corsa B Arden Blue...
Corsa B Arden Blue...