project grim reaper

[rems]

do it mate its cheap and effective

major update

BONNET WRAP DONE

will let the pics talk for themself







all comments welcome

[PRICER]

wow cool where did you get that from?

[rems]

had to order it online

newkon is the name of the company they have loads on there

[brendy]

yer im thinking of doing it now possibly
btw your bonnet looks sik, that must of cost you alot to do it and i take it you got it done professionally, coz it looks like theres no air bubbles or anything like that. looks quality.

[Mike_Parr]

Looks epic. 5*!

[matty101]

looks awsome that mate.

[nath2905]

tht looks awsome pal

[rems]

cheers peeps

[rems]

UUUUUUUPDATES

havent updated this in a while so here goes (copied and pasted from another forum)

well pics of how its standing







wheels spaced out better

fronts



rears need a bit more space



but going to get another set of arches which wont be as wide and the wheels will have a bit of poke .....and not forgetting to mention will be carbon wraped

have now got myself some front coilovers and adjustable rears

a pair of 32mm spacers being made

and a new drivers seat







from an RX7 FD3S

well headlight covers came so had to fit them and take pics to share with Y'ALL........and it looks EVIL imo

in the words of agro santos "me likey like"





ight i have been a bit busy retrimmed my A pillars in carbon wrap and done a bit of graffiti on them







them cabon wrapped the boot release thing (dont know the name lol) did crinkle abit due to the shape



have also carbon wrapped my arches but as the wrap wasnt wide enough i had to do it in 2-3 pieces, not that noticable until you look up close! havent got pics of them atm due to the car being filthy

oh and just a tease

NEW SPACERS



carbon wrapped the b pillars, i found the trick to good wrapping is a hairdryer



was going to do a bit of stickerbombing on them but decided not to



had a couple of stickers that i wanted to use but i couldnt find the best place to stick them



then fitter A pillars and B pillars





now i cant decide what to do with the center console as doesnt really go with what i have done so far this is how it looks



an ideas? carbon wrapping it is more difficult due to the gap where the clock is as cant really leave the inside plain

then i gave it a fooking good clean as i havent in a while









also carbon wrapped the arches need to redo them though



well last night as i pulled out of a parking space my bottom ball joint snapped was lucky it happened at work as the day before i done a 300 mile drive from camberidge to devon, if it happened on the motorway god knows what would have a happened, also due to the fact nothing was holding my wheel steady when it was put onto th back of the lorry my wings got damaged and pulled the drive shaft out and ripped my inner CV boot

heres the pics







damage wing





have managed to get the wing as best as i could and whilst i was doing it i came up with a lil idea and set to work.......bit of graffiti















car is now back together and wing is fitted with a bit more work done to keep with the grim reaper

heres the pics





i had got a new front splitter off a trans am, well i fitted and look rude as **** however i had a bit of an incident as to which i bottomed out and it ended up wrapped under the car smashed to pieces

however i played around with it abit to make it work as would have been a waste of money not to atleast try, it did have vents in it but these got damaged when i caught it so have came up with this



it didnt look right so took it off and replaced it with a mk2 golf one

gave the car a wash and fitted new splitter from a mk2 golf












also removed the heart and star stickers off the dash



and 32mm spacers came in the post yesturday







£80 well spent i think

well finally got round to fitting the RX7 seats, was a bit of a pain in the arse job but here is how they look







next on the list is

respray front and rear bumper and boot

depo standard headlights and add a bit of a twist

fit custom exhaust tips

fit 52mm rear spacers

replace stem sills to stop oil being burnt aswell as doing water pump, cambelt and a service all in time for modded nats

all comments welcome

[jordyp]

looking soo good mate loving the bonnet and wing seats are nice too. how hard were they to fit? keep the updates coming mate

[nath2905]

i think thats awsome mate!
love the graffiti wing, i recon you do the whole would look mint!
what are the arches off?
shame about your damage tho

[PRICER]

you can certainly say its one of a kind and thats a fact not my cupp'a tea but looks alright to be fair

[rems]

cheers for the comments

jordy - they were a bit or a pain to get right but not that difficult tbh i just used 90' angle alluminium to bolt to the seat then lined up the holes to the corsa b seat subframes and drilled the holes and bolted them, took a couple of attempts but got there in the end

nath - cheers dude have had mixed reactions about the wing and im still undecided whether to keep it or not! the arches are just universal JDM arches which i cut down as they were a bit to wide lol

pricer - cheers mate yea i do like to be different lol and your not the only one who isnt that keen on it lol

[rems]

yet another update

decided to redo my boot lock, so got rid of the carbon wrap and done this with left over material i had kicking around







have also varnished it so that it doesnt go mank in the wet and becomes waterproof

now just looking to get the new vauxhall badge to finish it of

all comments welcome

[nath2905]

different, have get a pic once fitted