fault code
Moderator: Octane2097
- scotsvampyr
- CB-Uk Newbie
- Posts: 42
- Joined: Tue Jun 14, 2011 5:29 pm
fault code
ok as many of you will have seen i have a problem that is still unsolved i wont go into it ill tell you this bit and someone may be able to help hopefully,
now i heard of the test when driving push the two buttons where the date should be and its reading was
f 12
f 92
now does anyone know what these are or post a link to topic on faults
got it chears anyway
now i heard of the test when driving push the two buttons where the date should be and its reading was
f 12
f 92
now does anyone know what these are or post a link to topic on faults
got it chears anyway
A85 one of the best roads in scotland , driving a arden blue envoy , keep an eye on it in project logs
i.c.e dont have a clue but i will get a nice setup if it kills me
i.c.e dont have a clue but i will get a nice setup if it kills me
-
- CB-Uk User
- Posts: 282
- Joined: Thu Oct 08, 2009 5:45 pm
- Location: Stevenage, Herts
- scotsvampyr
- CB-Uk Newbie
- Posts: 42
- Joined: Tue Jun 14, 2011 5:29 pm
Re: fault code
ok whats the fault code 95 Hot start valve what is the cause of this problem
A85 one of the best roads in scotland , driving a arden blue envoy , keep an eye on it in project logs
i.c.e dont have a clue but i will get a nice setup if it kills me
i.c.e dont have a clue but i will get a nice setup if it kills me
- scotsvampyr
- CB-Uk Newbie
- Posts: 42
- Joined: Tue Jun 14, 2011 5:29 pm
Re: fault code
this has been up for 6 days and no reply yet someone has bound to had this problem before
A85 one of the best roads in scotland , driving a arden blue envoy , keep an eye on it in project logs
i.c.e dont have a clue but i will get a nice setup if it kills me
i.c.e dont have a clue but i will get a nice setup if it kills me
- Octane2097
- Senior Moderator
- Posts: 2125
- Joined: Sun Jun 25, 2006 9:25 pm
- Location: Barnsley, South Yorkshire
Re: fault code
the 2button "trick" dosnt show fault codes sadly
on the 1.0i and 1.2 16v motors its not possible to find faultcodes without a diagnostic computer.
btw a hotstart valve is somthing for turbocharged engines (like the C20LET)
what exactly is wrong with your corsa? sorry i dont frequent here much these days, had a look and couldnt find any threads regarding your car.
on the 1.0i and 1.2 16v motors its not possible to find faultcodes without a diagnostic computer.
btw a hotstart valve is somthing for turbocharged engines (like the C20LET)
what exactly is wrong with your corsa? sorry i dont frequent here much these days, had a look and couldnt find any threads regarding your car.
Peugeot 207 Sport 1.6 VTI (120)
- scotsvampyr
- CB-Uk Newbie
- Posts: 42
- Joined: Tue Jun 14, 2011 5:29 pm
Re: fault code
my car will turn over without starting for ages then it will start after 4 or 5 mins but the two button said f 12 then f 95 ive changed the cam sensor but unfortunatly i hve to bump it the now cos i think (hope) i fried the starter
A85 one of the best roads in scotland , driving a arden blue envoy , keep an eye on it in project logs
i.c.e dont have a clue but i will get a nice setup if it kills me
i.c.e dont have a clue but i will get a nice setup if it kills me
-
- CB-Uk User
- Posts: 111
- Joined: Sat Nov 20, 2010 4:00 pm
Re: fault code
where bouts are you?
- Octane2097
- Senior Moderator
- Posts: 2125
- Joined: Sun Jun 25, 2006 9:25 pm
- Location: Barnsley, South Yorkshire
Re: fault code
i bet its the crank sensor, had this problem with mine
and is a common probem on the 1.0 12v
could start it first thing in the morning when it was cold, but after it warmed up and you tryed to start it warm it wouldnt fire.
£25 for a new crank sensor and about a hr fitting (its right at the back of the engine)
id still reccomend getting it on a obd2 machine but i reccon thats it.
and is a common probem on the 1.0 12v
could start it first thing in the morning when it was cold, but after it warmed up and you tryed to start it warm it wouldnt fire.
£25 for a new crank sensor and about a hr fitting (its right at the back of the engine)
id still reccomend getting it on a obd2 machine but i reccon thats it.
Peugeot 207 Sport 1.6 VTI (120)
-
- CB-Uk User
- Posts: 111
- Joined: Sat Nov 20, 2010 4:00 pm
Re: fault code
i can run diagnostics and i've got a starter motor. if its crank sensor i can also fit it for you.
- scotsvampyr
- CB-Uk Newbie
- Posts: 42
- Joined: Tue Jun 14, 2011 5:29 pm
Re: fault code
well i am in tyndrum scotland , and i bet youre in england lol
A85 one of the best roads in scotland , driving a arden blue envoy , keep an eye on it in project logs
i.c.e dont have a clue but i will get a nice setup if it kills me
i.c.e dont have a clue but i will get a nice setup if it kills me
-
- CB-Uk User
- Posts: 111
- Joined: Sat Nov 20, 2010 4:00 pm
Re: fault code
am in airdrie but its bout 70 miles