helllpppp!!!! my corsa gls 5dr
just put some coilovers on my car and my old astra wheels rubbed the coilovers
right.....
so i bought some ats cups which fit on really snug but ......?
i just want to go lower but if i do the arches rub on the outer lip
any! no if i can adjust it now or if i have to but the camber bolts that are on ebay if u want me to get some pics u just giv me a shout cheers guys
rear camber
Moderator: Octane2097
- hicks_22
- CB-Uk Newbie
- Posts: 49
- Joined: Sat Jun 11, 2011 8:42 am
rear camber
Sound likes you need to get some smaller bolts to go through the camber adjusters mate. So you have more movement to adjust the camber but your tyres will wear if you do. I've lowered mine 120mm and it don't rub at all
-
- CB-Uk Newbie
- Posts: 18
- Joined: Sat Sep 17, 2011 7:05 pm
- Location: leeds
Re: rear camber
well the coilovers on the back there the single spring then the shock with just one bolt to bolt to the hub soo
do i need to put a smaller bolt in there or cant it be done cheers bud
do i need to put a smaller bolt in there or cant it be done cheers bud
- PRICER
- CB-Uk User
- Posts: 3510
- Joined: Sun May 10, 2009 9:21 pm
- Location: ludlow shropshire
Re: rear camber
urmm your a bit f**k, what you can do is rent or buy an arch rolling tool of ebay or somewhere to roll your rear arches a bit or just get in there with a hammer and bend the lip straight or back over onto itself if you take the rear plastic arch trim off you'l be able to see what i mean, and dont be scared to use a bit of brute force with the hammer because at the end of the day its all covered back up again with the trim, camber shims are ugly fugly on the rear and can affect the handling i would say dont do it to the rear.
TURBO LAG IS JUST FOREPLAY
2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
-
- CB-Uk Newbie
- Posts: 18
- Joined: Sat Sep 17, 2011 7:05 pm
- Location: leeds
Re: rear camber
right sound so i need to get the arches rolled or get the tool my self
or just put abit of camber on the back end cheers
or just put abit of camber on the back end cheers