Brocade 2.0 16v

Jamie1991 · Post by **Jamie1991** » Tue Oct 11, 2011 7:04 pm

do have good fun when it rains in them tyres thou, although nearly crash half time

ive just ordered some camber adjustment bolts anyway and cheers mate they'll be going gloss black

Jamie1991 · Post by **Jamie1991** » Tue Oct 18, 2011 9:55 am

few more bits now! got some rear shocks, camber adjustment bolts, and tiny rear springs

close up on camber bolts

here you can see how it works.. its pushes the hub away from strut to bring camber back out..

normal spring, 60mm lowering spring and the tiny springs

rear strut painted and fitted

M4RSH4LL · Post by **M4RSH4LL** » Tue Oct 18, 2011 10:07 am

camber bolta for front yeah? i need them for the speedlines if i plan to use then ha

Jamie1991 · Post by **Jamie1991** » Tue Oct 18, 2011 4:25 pm

yeahh mate.. they work well.. defiantly will bring camber out. guna do my camber allignment and tracking 2mra at college! you will need to have tracking redone if you use these camber bolts thou, they £21 but worth money if you see what the camber did to my last tyres few pages back

M4RSH4LL · Post by **M4RSH4LL** » Tue Oct 18, 2011 6:38 pm

aye i did :L tho its to make the speedlines fit better

Jamie1991 · Post by **Jamie1991** » Tue Oct 18, 2011 7:11 pm

how will it make them fit better?

M4RSH4LL · Post by **M4RSH4LL** » Tue Oct 18, 2011 9:56 pm

when i lowered it it made it rub a bit at the front so if i had negitive camber it wud push away from the rub area

Jamie1991 · Post by **Jamie1991** » Thu Oct 20, 2011 7:54 am

yeah but then your tyres will lean on the insides and tyre wear will increase

Jamie1991 · Post by **Jamie1991** » Thu Oct 20, 2011 6:24 pm

cav slabs update.. had them shotblasted this week, super clean now! needs a few scuffs filling now before paint

essexjohn · Post by **essexjohn** » Thu Oct 20, 2011 11:41 pm

Looking good mate

Post by **nath2905** » Fri Oct 21, 2011 9:13 pm

get the tyres on before you paint them mate

just incase they chip them... people who did my cesaro's battered two of my wheels

PRICER · Post by **PRICER** » Sat Oct 22, 2011 9:54 am

they'v turned out mint fair play!!!

Jamie1991 · Post by **Jamie1991** » Sat Oct 22, 2011 9:56 am

yeah thought of that, cheers mate.. well i put tyres on myself at college, soo ill be extra careful putting them on, though is hard with such low profile tyres to get them on

Jamie1991 · Post by **Jamie1991** » Sat Oct 22, 2011 9:58 am

PRICER wrote:they'v turned out mint fair play!!!

cheers mate

good wheels youve given me haha, just had too much paint on really but thats sorted now...

Jamie1991 · Post by **Jamie1991** » Fri Oct 28, 2011 10:20 am

well over last few days have been prepping cav slabs, firstly i was using filler primer to smooth out the wheels as was rough from shot blasting

once they were smooth enough i coated them in grey primer

then i sprayed the insides black.. now all ready for paintshop to spray and ill put tyres on at college wednesday

also grinded down all arches n painted (green all i had lol) and also 100mm rear spring in..

Corsa-B.uk - Vauxhall, Opel and Holden Corsa B Owners Club

Brocade 2.0 16v

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)