wiring help (nova loom)

Help and advice section for technical questions on your Corsa.
Please check that your query hasn't already been answered in FAQ and Technical Info section.

Moderator: Octane2097

User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

wiring help (nova loom)

Post by nath2905 »

right so as a few of you may know i have changed the engine too a 1.6 8v,
i have a nova loom but all the plugs look different to mine, and i arnt a technion :lol:

so i was just wondering if anyone can help by labeling the wires for me?
here are some pictures, i know the yellows ones must be injector's, the blue little one must be the water temp,
then the rest i dont have a clue really

Image

Image

Image


Image

any help will be greatful... also some wires have been cut, so need find what clip/connection is needed for that too,

thanks you :D
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: wiring help (nova loom)

Post by c16se corsa »

Where abouts are you based I know these engines and wiring like the back of my hand
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: wiring help (nova loom)

Post by nath2905 »

stoke on trent mate
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
PRICER
CB-Uk User
Posts: 3510
Joined: Sun May 10, 2009 9:21 pm
Location: ludlow shropshire

Re: wiring help (nova loom)

Post by PRICER »

what are you stuck with nath? as draping the loom over the engine should make alot more sence as to where the plugs attach to,
TURBO LAG IS JUST FOREPLAY ;)

2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: wiring help (nova loom)

Post by nath2905 »

got hand full of cut wires too :/, i'll have a play see what happens :lol:
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: wiring help (nova loom)

Post by c16se corsa »

I would just plug what you have in and go from there the pictures of the cut wires you have are just basically every thing you need to run it;

Thick red - constantly live
Thin black - switch live
Thick red and blue - fuel pump feed
Green - rev counter
Blue - temp gauge
Brown yellow - diagnostics
Brown white - diagnostics

By the look of your loom it's from a nova gte looks to be a dizzy type?
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
User avatar
PRICER
CB-Uk User
Posts: 3510
Joined: Sun May 10, 2009 9:21 pm
Location: ludlow shropshire

Re: wiring help (nova loom)

Post by PRICER »

it would be wouldnt it means as its for a 1.6 8v?
TURBO LAG IS JUST FOREPLAY ;)

2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: wiring help (nova loom)

Post by c16se corsa »

Kind of, the nova gte had the e16se on hall effect dizzy and the gsi had the c16se on coilpack so the looms are quite different the c16 also came in the Astra cessaro ( think that's how you spell it) anyway the silly convertible saloon abomination they made
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: wiring help (nova loom)

Post by nath2905 »

c16se corsa wrote:I would just plug what you have in and go from there the pictures of the cut wires you have are just basically every thing you need to run it;

Thick red - constantly live
Thin black - switch live
Thick red and blue - fuel pump feed
Green - rev counter
Blue - temp gauge
Brown yellow - diagnostics
Brown white - diagnostics

By the look of your loom it's from a nova gte looks to be a dizzy type?

cant remember what he said it was... but i'd say the dizzy as most were, werent they...
yeah since looking at both sets of wiring, i come to the conclusion that them cut wires on the end, join a black connector that i have on the corsa ecu wiring... so goin cut that connection off my other corsa loom and join them up then its just the figuring out the rest.... but i may have another loom with all connections hopefully :thumbs:
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: wiring help (nova loom)

Post by nath2905 »

its a siemens ecu and i red earlier thats the dizzy, and the boush it coil i think, that was the way anyway
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: wiring help (nova loom)

Post by c16se corsa »

If everything plugs up in regards to the engine then you only need to wire the cut wires to the small black connector in the drivers side kick pannel and the Siemens Ecu is for the later type c16 with dis and bosh is for the early e16 that has the worlds biggest afm and the distributor
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
User avatar
PRICER
CB-Uk User
Posts: 3510
Joined: Sun May 10, 2009 9:21 pm
Location: ludlow shropshire

Re: wiring help (nova loom)

Post by PRICER »

oh nath, i think you'v found the true 8v nut here ;) (c16se corsa)
TURBO LAG IS JUST FOREPLAY ;)

2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: wiring help (nova loom)

Post by c16se corsa »

My mother calls me the oracle is that a good thing :?
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: wiring help (nova loom)

Post by c16se corsa »

Here you go

Image
Image

1. Airflow Meter
2. Injectors
3. Not Entireley sure
4. Should Be Crank Sensor
5. Ignition Amplifier
6. Coil Pack (Connector Missing) {Green -}{ Black sw +}
7. Throttle Position Sensor
8. Hall Effect Sensor (dizzy)
9. Water Temp Sensor (Clocks)

If ive missed any let me know its abit difficult withough it being over the car and with a few plugs missing
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: wiring help (nova loom)

Post by nath2905 »

cheer's for them picture's mate, i'm going to label the full wiring up now, but ...
anyidea's what this is?
Image

it has 4 small wires in it, and blue bit on it
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
Post Reply