Corsa SRi Project

For New & Continuing Projects Only.
NOT for past projects or questions.
Post Reply
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: Corsa SRi Project

Post by c16se corsa »

Some good stuff and bad stuff today!

Fuel pump mounted
Image

Base cleaned up and the holes ported out dint get a picture of that tho
Image

Carbs mounted up
Image

Bolted up ready to rock and roll
Image

..........no spark wrong dizzy.........god damn so had to just whip the old loom and ecu on to get a spark to see if it ran

Excuse the s**t video
Image

So all the easy stuffs done now comes the hard bit!
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: Corsa SRi Project

Post by c16se corsa »

Image
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: Corsa SRi Project

Post by nath2905 »

youre is better than mine already :( :lol:
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: Corsa SRi Project

Post by c16se corsa »

Dizzy should be here Wednesday eBay bargaining !
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: Corsa SRi Project

Post by c16se corsa »

Got a few more thing done this week

Inlet all ground out and chamferd out to make it atomise better (courtesy of the french work experince kid)
Image

Had to lower the altenator 4 inch
Image
Image

Throttle linkage and new carb rubbers on
Image

Final mounted not taking the chuffer off again
Image

Running better with it jetted up but still waiting on the dizzy so i can set the ignition timing and so it can advance retard itself under load
Image
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
kevinturna
CB-Uk User
Posts: 255
Joined: Sat Sep 03, 2011 12:05 pm

Re: Corsa SRi Project

Post by kevinturna »

looking mint :D loving the alloys :) what carb is that???
Saab 900s 2.0 3 door n/a 140bhp
Corsa 1.4/1.6 5 door n/a 0bhp
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: Corsa SRi Project

Post by c16se corsa »

cheers mate and there from a zzr600 :)
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
kevinturna
CB-Uk User
Posts: 255
Joined: Sat Sep 03, 2011 12:05 pm

Re: Corsa SRi Project

Post by kevinturna »

do like a black corsa :P cheers mate been looking forever for some carbs :S :P
Saab 900s 2.0 3 door n/a 140bhp
Corsa 1.4/1.6 5 door n/a 0bhp
kevinturna
CB-Uk User
Posts: 255
Joined: Sat Sep 03, 2011 12:05 pm

Re: Corsa SRi Project

Post by kevinturna »

oh and how much would you charge for making another mani? for the carbs cheers :D
Saab 900s 2.0 3 door n/a 140bhp
Corsa 1.4/1.6 5 door n/a 0bhp
User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: Corsa SRi Project

Post by nath2905 »

looks mint mate :)
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: Corsa SRi Project

Post by c16se corsa »

kevinturna wrote:oh and how much would you charge for making another mani? for the carbs cheers :D
it would probs be about 80 quid ish but i would need the carbs and a inlet manifold gasket aswell
nath2905 wrote:looks mint mate :)
its slowley getting there just hope this dizzy turns up tomorrow thencan get it on c02 machine and set up
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
kevinturna
CB-Uk User
Posts: 255
Joined: Sat Sep 03, 2011 12:05 pm

Re: Corsa SRi Project

Post by kevinturna »

ok cheers mate, when i got the moneys ill give u a message :D
Saab 900s 2.0 3 door n/a 140bhp
Corsa 1.4/1.6 5 door n/a 0bhp
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: Corsa SRi Project

Post by c16se corsa »

no worries mate
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
matty589
CB-Uk User
Posts: 350
Joined: Tue Apr 26, 2011 10:05 pm
Location: bristol

Re: Corsa SRi Project

Post by matty589 »

looking good mate :)
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: Corsa SRi Project

Post by c16se corsa »

matty589 wrote:looking good mate :)
cheers bud 8) coming togeter niceley
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
Post Reply