wiring help (nova loom)

Help and advice section for technical questions on your Corsa.
Please check that your query hasn't already been answered in FAQ and Technical Info section.

Moderator: Octane2097

User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: wiring help (nova loom)

Post by nath2905 »

yeah thats how we decided member, there is a possibly that that sensor in the dizzy is nackered.. and is not sending the signal to say that the engine is turning, thats what i thought anyway
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: wiring help (nova loom)

Post by c16se corsa »

Has dizzy got 3 or 2 pins
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: wiring help (nova loom)

Post by nath2905 »

3 pin's
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

wiring help (nova loom)

Post by c16se corsa »

Right am just trying to build a picture in my head of what could be missing lol, what about ignition amplifier ? That's part of the trigger system
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: wiring help (nova loom)

Post by nath2905 »

Got that, and coil
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: wiring help (nova loom)

Post by c16se corsa »

So it's either got to be the hall sensor in the dizzy or there's no power to the ecu I would say
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: wiring help (nova loom)

Post by nath2905 »

ok mate thanks, thick red is power isnt it?
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: wiring help (nova loom)

Post by c16se corsa »

Yeah the thick red is the constant power to it and the black one is the ignition switch live
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: wiring help (nova loom)

Post by nath2905 »

i now have spark but no fuel, any idea's? tried 2 relay's the pump works, but it doesnt pressure or anything under the key, then obz doesnt get nothing to the engine
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
PRICER
CB-Uk User
Posts: 3510
Joined: Sun May 10, 2009 9:21 pm
Location: ludlow shropshire

Re: wiring help (nova loom)

Post by PRICER »

just a thought, you have put the lines on the right way around havent you?
TURBO LAG IS JUST FOREPLAY ;)

2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: wiring help (nova loom)

Post by c16se corsa »

the pump only works on cranking if its not then it could only be the wire from the engine loom to the car loom and if its getting fuel to the rail but nothings happening swap the fuel lines round on the rail
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: wiring help (nova loom)

Post by nath2905 »

swaped lines one as it wouldnt get to the rail, then that sorted that, but the fuel only got there if we bridge'd one of the relay connector's

the blue red wire?
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: wiring help (nova loom)

Post by nath2905 »

http://www.ebay.co.uk/itm/120693714097? ... 911wt_1108

would that work for the dizzy?
as the one i have has the wrong connector thats why i had no sprak *hand over face* :lol:
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: wiring help (nova loom)

Post by nath2905 »

should there be any stupid earths to like the rail or something?
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: wiring help (nova loom)

Post by c16se corsa »

I've got one of those dizzys that I don't need but that's the baby u want because it acts as the crank sensor and there should be a few earths poking out of the loom near the rail but the rail itself does not need to be earthed
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
Post Reply