Corsa SRi Project
- c16se corsa
- CB-Uk User
- Posts: 271
- Joined: Thu Jan 27, 2011 3:29 pm
- Location: Pontefract
Re: Corsa SRi Project
Some good stuff and bad stuff today!
Fuel pump mounted
Base cleaned up and the holes ported out dint get a picture of that tho
Carbs mounted up
Bolted up ready to rock and roll
..........no spark wrong dizzy.........god damn so had to just whip the old loom and ecu on to get a spark to see if it ran
Excuse the s**t video
So all the easy stuffs done now comes the hard bit!
Fuel pump mounted
Base cleaned up and the holes ported out dint get a picture of that tho
Carbs mounted up
Bolted up ready to rock and roll
..........no spark wrong dizzy.........god damn so had to just whip the old loom and ecu on to get a spark to see if it ran
Excuse the s**t video
So all the easy stuffs done now comes the hard bit!
If its not bodged then its not "propper"
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
- c16se corsa
- CB-Uk User
- Posts: 271
- Joined: Thu Jan 27, 2011 3:29 pm
- Location: Pontefract
Re: Corsa SRi Project
If its not bodged then its not "propper"
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
- nath2905
- General Moderator
- Posts: 1869
- Joined: Mon Jan 25, 2010 7:03 pm
- Location: Stoke On Trent
Re: Corsa SRi Project
youre is better than mine already
The Future's Bright, The Future's Orange!
B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679
Holidays Are Coming....
B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679
Holidays Are Coming....
- c16se corsa
- CB-Uk User
- Posts: 271
- Joined: Thu Jan 27, 2011 3:29 pm
- Location: Pontefract
Re: Corsa SRi Project
Dizzy should be here Wednesday eBay bargaining !
If its not bodged then its not "propper"
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
- c16se corsa
- CB-Uk User
- Posts: 271
- Joined: Thu Jan 27, 2011 3:29 pm
- Location: Pontefract
Re: Corsa SRi Project
Got a few more thing done this week
Inlet all ground out and chamferd out to make it atomise better (courtesy of the french work experince kid)
Had to lower the altenator 4 inch
Throttle linkage and new carb rubbers on
Final mounted not taking the chuffer off again
Running better with it jetted up but still waiting on the dizzy so i can set the ignition timing and so it can advance retard itself under load
Inlet all ground out and chamferd out to make it atomise better (courtesy of the french work experince kid)
Had to lower the altenator 4 inch
Throttle linkage and new carb rubbers on
Final mounted not taking the chuffer off again
Running better with it jetted up but still waiting on the dizzy so i can set the ignition timing and so it can advance retard itself under load
If its not bodged then its not "propper"
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
-
- CB-Uk User
- Posts: 255
- Joined: Sat Sep 03, 2011 12:05 pm
Re: Corsa SRi Project
looking mint loving the alloys what carb is that???
Saab 900s 2.0 3 door n/a 140bhp
Corsa 1.4/1.6 5 door n/a 0bhp
Corsa 1.4/1.6 5 door n/a 0bhp
- c16se corsa
- CB-Uk User
- Posts: 271
- Joined: Thu Jan 27, 2011 3:29 pm
- Location: Pontefract
Re: Corsa SRi Project
cheers mate and there from a zzr600
If its not bodged then its not "propper"
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
-
- CB-Uk User
- Posts: 255
- Joined: Sat Sep 03, 2011 12:05 pm
Re: Corsa SRi Project
do like a black corsa cheers mate been looking forever for some carbs :S
Saab 900s 2.0 3 door n/a 140bhp
Corsa 1.4/1.6 5 door n/a 0bhp
Corsa 1.4/1.6 5 door n/a 0bhp
-
- CB-Uk User
- Posts: 255
- Joined: Sat Sep 03, 2011 12:05 pm
Re: Corsa SRi Project
oh and how much would you charge for making another mani? for the carbs cheers
Saab 900s 2.0 3 door n/a 140bhp
Corsa 1.4/1.6 5 door n/a 0bhp
Corsa 1.4/1.6 5 door n/a 0bhp
- nath2905
- General Moderator
- Posts: 1869
- Joined: Mon Jan 25, 2010 7:03 pm
- Location: Stoke On Trent
Re: Corsa SRi Project
looks mint mate
The Future's Bright, The Future's Orange!
B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679
Holidays Are Coming....
B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679
Holidays Are Coming....
- c16se corsa
- CB-Uk User
- Posts: 271
- Joined: Thu Jan 27, 2011 3:29 pm
- Location: Pontefract
Re: Corsa SRi Project
it would probs be about 80 quid ish but i would need the carbs and a inlet manifold gasket aswellkevinturna wrote:oh and how much would you charge for making another mani? for the carbs cheers
its slowley getting there just hope this dizzy turns up tomorrow thencan get it on c02 machine and set upnath2905 wrote:looks mint mate
If its not bodged then its not "propper"
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
-
- CB-Uk User
- Posts: 255
- Joined: Sat Sep 03, 2011 12:05 pm
Re: Corsa SRi Project
ok cheers mate, when i got the moneys ill give u a message
Saab 900s 2.0 3 door n/a 140bhp
Corsa 1.4/1.6 5 door n/a 0bhp
Corsa 1.4/1.6 5 door n/a 0bhp
- c16se corsa
- CB-Uk User
- Posts: 271
- Joined: Thu Jan 27, 2011 3:29 pm
- Location: Pontefract
Re: Corsa SRi Project
no worries mate
If its not bodged then its not "propper"
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
-
- CB-Uk User
- Posts: 350
- Joined: Tue Apr 26, 2011 10:05 pm
- Location: bristol
Re: Corsa SRi Project
looking good mate
- c16se corsa
- CB-Uk User
- Posts: 271
- Joined: Thu Jan 27, 2011 3:29 pm
- Location: Pontefract
Re: Corsa SRi Project
cheers bud coming togeter niceleymatty589 wrote:looking good mate
If its not bodged then its not "propper"
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528