hi there guys
just a quick one really i am buying a set of alloys off an mr2 4x100 pcd but the center bore is bigger than my corsas the guy recons its a 65mm bore they are a bigger bore as i have tried one on the car but are spigot rings really necessary? can i use them without?
thanks in advance
spigot rings?
Moderator: Octane2097
-
LSKSK
- CB-Uk User
- Posts: 180
- Joined: Wed Mar 09, 2011 1:46 am
Re: spigot rings?
Yeah man you need spigot rings
If you have the wrong size it gives a similar feel to unbalanced wheels or your tracking being out
Took me helluva time to narrow it down to spigots
If you have the wrong size it gives a similar feel to unbalanced wheels or your tracking being out
Took me helluva time to narrow it down to spigots
T reg 1.0 12V corsa b called...Mikey!! 
-
LSKSK
- CB-Uk User
- Posts: 180
- Joined: Wed Mar 09, 2011 1:46 am
-
Cyberduck16
- CB-Uk Newbie
- Posts: 13
- Joined: Fri Jul 13, 2012 11:25 am
Re: spigot rings?
Thanks for the reply any idea where I can find 56.6 to 65mm spigots 65mm seems big to me tho I haven't measured it my self yet does this sound right?
-
LSKSK
- CB-Uk User
- Posts: 180
- Joined: Wed Mar 09, 2011 1:46 am
Re: spigot rings?
No idea on the sizing pal
All my spigot rings have come with my alloys
The ones that shook my car I sold on because I couldn't lower the car with those.
I'd suggest a motor spares shop if none on here know.
All my spigot rings have come with my alloys
The ones that shook my car I sold on because I couldn't lower the car with those.
I'd suggest a motor spares shop if none on here know.
T reg 1.0 12V corsa b called...Mikey!!