Corsa 1.0 envoy, silver.

For New & Continuing Projects Only.
NOT for past projects or questions.
User avatar
Jamie1991
CB-Uk User
Posts: 825
Joined: Mon Jul 11, 2011 9:40 am
Location: Walsall

Re: Corsa 1.0 envoy, silver.

Post by Jamie1991 »

Good stuff, can't beat a bargain :thumbs:
My Project : Brocade 2.0 16v
....
Cant wait for Summer!
User avatar
PRICER
CB-Uk User
Posts: 3510
Joined: Sun May 10, 2009 9:21 pm
Location: ludlow shropshire

Re: Corsa 1.0 envoy, silver.

Post by PRICER »

nice! thats cheap haha :)
TURBO LAG IS JUST FOREPLAY ;)

2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
User avatar
RyanB21
CB-Uk User
Posts: 229
Joined: Sun Sep 11, 2011 8:17 pm
Location: gillingham, kent

Re: Corsa 1.0 envoy, silver.

Post by RyanB21 »

Finally recieved last l piece today and bonus it came with a jacking cover only 3 to go lol. Its turquoise atm and sets me back £70 so far but its complete and the side skirts have every lug in place :D the rear arches too but the front needs to be stuck on :/ im assuming the rear arches will go on the way my ones will come off? Ive decided to do the skirts properly and buy 16 plastic clips. Is it best to self taper the clips on and then slide the skirt over?
User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: Corsa 1.0 envoy, silver.

Post by nath2905 »

if you drill the sills make sure you wax oil it cus they will rust very fast, my skirts are just bonded on
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
Jamie1991
CB-Uk User
Posts: 825
Joined: Mon Jul 11, 2011 9:40 am
Location: Walsall

Re: Corsa 1.0 envoy, silver.

Post by Jamie1991 »

:doh: whoops, I've drilled the sills and never treated them! Hope mine have rotted
My Project : Brocade 2.0 16v
....
Cant wait for Summer!
User avatar
RyanB21
CB-Uk User
Posts: 229
Joined: Sun Sep 11, 2011 8:17 pm
Location: gillingham, kent

Re: Corsa 1.0 envoy, silver.

Post by RyanB21 »

As much as id like to do it properly i think bonding is going to be cheapest fastest way. I doubt id ever remove them after anyway. Thanks guys
User avatar
scorpiotn1
CB-Uk User
Posts: 801
Joined: Fri Aug 06, 2010 3:54 pm
Location: Northern Ireland

Re: Corsa 1.0 envoy, silver.

Post by scorpiotn1 »

Jamie1991 wrote::doh: whoops, I've drilled the sills and never treated them! Hope mine have rotted

Crap i think i ment to coat mine as well but in the rush getting them may have forgot :doh:
"I mod for the plesure... Not to drive ignorantly"
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
User avatar
RyanB21
CB-Uk User
Posts: 229
Joined: Sun Sep 11, 2011 8:17 pm
Location: gillingham, kent

Re: Corsa 1.0 envoy, silver.

Post by RyanB21 »

Just realised today after putting in passenger calibra leather that the yellow tags howing on my seat belts are because the arms have fired off previous. Salvaged a passenger one from my old seat now ned drivers as im sure it will fail mot at some point. Im realky saving to move out now so not many plans. Side akirts sprayed and put on and want alloy furbed. Going to paintthem my self, graphite with a polished rim.

Also after being pulled over by a "vehicle inspector" police lol iv changed rear suspension to 50mm but stil damper with pi shocks. Raising the front too and changing headlight bulbs back to standard or white. Not alowwed yellow. Supose saves me gettin points.
User avatar
PRICER
CB-Uk User
Posts: 3510
Joined: Sun May 10, 2009 9:21 pm
Location: ludlow shropshire

Re: Corsa 1.0 envoy, silver.

Post by PRICER »

thought you were allowed yellow legally,

http://www.dmv.ca.gov/pubs/vctop/d12/vc25950.htm

The emitted light from all lamps and the reflected light from all reflectors, visible from in front of a vehicle, shall be white or yellow,
TURBO LAG IS JUST FOREPLAY ;)

2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
User avatar
RyanB21
CB-Uk User
Posts: 229
Joined: Sun Sep 11, 2011 8:17 pm
Location: gillingham, kent

Re: Corsa 1.0 envoy, silver.

Post by RyanB21 »

Sweet thanks pal! Anything about lowering mines like inch of the tyre at back and front :( but i spose it will do for these wintery months
User avatar
RyanB21
CB-Uk User
Posts: 229
Joined: Sun Sep 11, 2011 8:17 pm
Location: gillingham, kent

Re: Corsa 1.0 envoy, silver.

Post by RyanB21 »

It also say california department of vehicles?
User avatar
RyanB21
CB-Uk User
Posts: 229
Joined: Sun Sep 11, 2011 8:17 pm
Location: gillingham, kent

Re: Corsa 1.0 envoy, silver.

Post by RyanB21 »

Hey its been a while been super busy! Few updates to be followed by pics later. My insurance renews tomorrow! I am now fully comp for £1252 a year which beats last years £2789! So very happy! Iv removed the stickers off my car now looks so much cleaner and smarter. Side skirts are under way the progress pics will be up soon. Where can i purchase tiger seal?
User avatar
gazza_no7
CB-Uk User
Posts: 1532
Joined: Tue Aug 16, 2011 8:01 am
Location: Barton Upon Humber

Re: Corsa 1.0 envoy, silver.

Post by gazza_no7 »

You can get it off ebay mate :) not sure where else you can get it though
User avatar
RyanB21
CB-Uk User
Posts: 229
Joined: Sun Sep 11, 2011 8:17 pm
Location: gillingham, kent

Re: Corsa 1.0 envoy, silver.

Post by RyanB21 »

Not many updates jus serviced the car, snapped my t40 piece in the sump nut :( but got it done in the end. Iv removed fog light bulbs and added an external fog light that sits under the rear bumper in the middle, bit of a jap look. Jus bought a punto rear wiper to go on, im going to price up to get my front bumper number plate recess smoothed and continue with the graphite colour coding. Had my eye on a set of deepdish BBS LOOKALIKE alloys ready for pvs. Thats all so far i want a rev counter dash but will it plug and play?
User avatar
Jamie1991
CB-Uk User
Posts: 825
Joined: Mon Jul 11, 2011 9:40 am
Location: Walsall

Re: Corsa 1.0 envoy, silver.

Post by Jamie1991 »

Sounds good pal, have to stick up some pics
My Project : Brocade 2.0 16v
....
Cant wait for Summer!
Post Reply