Corsa 1.0 envoy, silver.
- Jamie1991
- CB-Uk User
- Posts: 825
- Joined: Mon Jul 11, 2011 9:40 am
- Location: Walsall
Re: Corsa 1.0 envoy, silver.
Good stuff, can't beat a bargain
My Project : Brocade 2.0 16v
....
Cant wait for Summer!
....
Cant wait for Summer!
- PRICER
- CB-Uk User
- Posts: 3510
- Joined: Sun May 10, 2009 9:21 pm
- Location: ludlow shropshire
Re: Corsa 1.0 envoy, silver.
nice! thats cheap haha
TURBO LAG IS JUST FOREPLAY
2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
- RyanB21
- CB-Uk User
- Posts: 229
- Joined: Sun Sep 11, 2011 8:17 pm
- Location: gillingham, kent
Re: Corsa 1.0 envoy, silver.
Finally recieved last l piece today and bonus it came with a jacking cover only 3 to go lol. Its turquoise atm and sets me back £70 so far but its complete and the side skirts have every lug in place the rear arches too but the front needs to be stuck on :/ im assuming the rear arches will go on the way my ones will come off? Ive decided to do the skirts properly and buy 16 plastic clips. Is it best to self taper the clips on and then slide the skirt over?
- nath2905
- General Moderator
- Posts: 1869
- Joined: Mon Jan 25, 2010 7:03 pm
- Location: Stoke On Trent
Re: Corsa 1.0 envoy, silver.
if you drill the sills make sure you wax oil it cus they will rust very fast, my skirts are just bonded on
The Future's Bright, The Future's Orange!
B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679
Holidays Are Coming....
B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679
Holidays Are Coming....
- Jamie1991
- CB-Uk User
- Posts: 825
- Joined: Mon Jul 11, 2011 9:40 am
- Location: Walsall
Re: Corsa 1.0 envoy, silver.
whoops, I've drilled the sills and never treated them! Hope mine have rotted
My Project : Brocade 2.0 16v
....
Cant wait for Summer!
....
Cant wait for Summer!
- RyanB21
- CB-Uk User
- Posts: 229
- Joined: Sun Sep 11, 2011 8:17 pm
- Location: gillingham, kent
Re: Corsa 1.0 envoy, silver.
As much as id like to do it properly i think bonding is going to be cheapest fastest way. I doubt id ever remove them after anyway. Thanks guys
- scorpiotn1
- CB-Uk User
- Posts: 801
- Joined: Fri Aug 06, 2010 3:54 pm
- Location: Northern Ireland
Re: Corsa 1.0 envoy, silver.
Jamie1991 wrote: whoops, I've drilled the sills and never treated them! Hope mine have rotted
Crap i think i ment to coat mine as well but in the rush getting them may have forgot
"I mod for the plesure... Not to drive ignorantly"
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
- RyanB21
- CB-Uk User
- Posts: 229
- Joined: Sun Sep 11, 2011 8:17 pm
- Location: gillingham, kent
Re: Corsa 1.0 envoy, silver.
Just realised today after putting in passenger calibra leather that the yellow tags howing on my seat belts are because the arms have fired off previous. Salvaged a passenger one from my old seat now ned drivers as im sure it will fail mot at some point. Im realky saving to move out now so not many plans. Side akirts sprayed and put on and want alloy furbed. Going to paintthem my self, graphite with a polished rim.
Also after being pulled over by a "vehicle inspector" police lol iv changed rear suspension to 50mm but stil damper with pi shocks. Raising the front too and changing headlight bulbs back to standard or white. Not alowwed yellow. Supose saves me gettin points.
Also after being pulled over by a "vehicle inspector" police lol iv changed rear suspension to 50mm but stil damper with pi shocks. Raising the front too and changing headlight bulbs back to standard or white. Not alowwed yellow. Supose saves me gettin points.
- PRICER
- CB-Uk User
- Posts: 3510
- Joined: Sun May 10, 2009 9:21 pm
- Location: ludlow shropshire
Re: Corsa 1.0 envoy, silver.
thought you were allowed yellow legally,
http://www.dmv.ca.gov/pubs/vctop/d12/vc25950.htm
The emitted light from all lamps and the reflected light from all reflectors, visible from in front of a vehicle, shall be white or yellow,
http://www.dmv.ca.gov/pubs/vctop/d12/vc25950.htm
The emitted light from all lamps and the reflected light from all reflectors, visible from in front of a vehicle, shall be white or yellow,
TURBO LAG IS JUST FOREPLAY
2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
- RyanB21
- CB-Uk User
- Posts: 229
- Joined: Sun Sep 11, 2011 8:17 pm
- Location: gillingham, kent
Re: Corsa 1.0 envoy, silver.
Sweet thanks pal! Anything about lowering mines like inch of the tyre at back and front but i spose it will do for these wintery months
- RyanB21
- CB-Uk User
- Posts: 229
- Joined: Sun Sep 11, 2011 8:17 pm
- Location: gillingham, kent
Re: Corsa 1.0 envoy, silver.
It also say california department of vehicles?
- RyanB21
- CB-Uk User
- Posts: 229
- Joined: Sun Sep 11, 2011 8:17 pm
- Location: gillingham, kent
Re: Corsa 1.0 envoy, silver.
Hey its been a while been super busy! Few updates to be followed by pics later. My insurance renews tomorrow! I am now fully comp for £1252 a year which beats last years £2789! So very happy! Iv removed the stickers off my car now looks so much cleaner and smarter. Side skirts are under way the progress pics will be up soon. Where can i purchase tiger seal?
- gazza_no7
- CB-Uk User
- Posts: 1532
- Joined: Tue Aug 16, 2011 8:01 am
- Location: Barton Upon Humber
Re: Corsa 1.0 envoy, silver.
You can get it off ebay mate not sure where else you can get it though
- RyanB21
- CB-Uk User
- Posts: 229
- Joined: Sun Sep 11, 2011 8:17 pm
- Location: gillingham, kent
Re: Corsa 1.0 envoy, silver.
Not many updates jus serviced the car, snapped my t40 piece in the sump nut but got it done in the end. Iv removed fog light bulbs and added an external fog light that sits under the rear bumper in the middle, bit of a jap look. Jus bought a punto rear wiper to go on, im going to price up to get my front bumper number plate recess smoothed and continue with the graphite colour coding. Had my eye on a set of deepdish BBS LOOKALIKE alloys ready for pvs. Thats all so far i want a rev counter dash but will it plug and play?
- Jamie1991
- CB-Uk User
- Posts: 825
- Joined: Mon Jul 11, 2011 9:40 am
- Location: Walsall
Re: Corsa 1.0 envoy, silver.
Sounds good pal, have to stick up some pics
My Project : Brocade 2.0 16v
....
Cant wait for Summer!
....
Cant wait for Summer!