Hi folks,
The radio in my 96 Corsa (for which I have the code) is permanently saying 'safe'. Ive tried holding AS while turning the ignition on etc but I dont get a beep and cant input the code.
Ive tried this radio in my Zafira and it works fine using the AS button to input the code but as soon as I put it back in the Corsa, it just displays 'safe' again.
Im guessing its got to be something wrong with the Corsa wiring but so far ive only had a look at the stereo plug and that looks OK. Any ideas gratefully received.
Grundig R100 radio wont allow code input
Moderator: Octane2097
-
SmeggyEddie91
- CB-Uk Newbie
- Posts: 17
- Joined: Thu Apr 11, 2013 4:44 pm
-
johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: Grundig R100 radio wont allow code input
Take to vaux imo should sort it in 5 mins
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
-
SmeggyEddie91
- CB-Uk Newbie
- Posts: 17
- Joined: Thu Apr 11, 2013 4:44 pm
Re: Grundig R100 radio wont allow code input
Finally cracked it!!!!!
It only works when the ignition is on th only worked for me when the ignition is at the position to turn the engine over.
So I unplugged the HT lead, turned it over, pressed AS, pressed radio on and it allowed for the code input.
Hope this helps someone else as I trawled the net and couldnt find a solution.
It only works when the ignition is on th only worked for me when the ignition is at the position to turn the engine over.
So I unplugged the HT lead, turned it over, pressed AS, pressed radio on and it allowed for the code input.
Hope this helps someone else as I trawled the net and couldnt find a solution.