Slight miss fire
Moderator: Octane2097
- Harkus
- CB-Uk User
- Posts: 655
- Joined: Mon Nov 10, 2008 4:11 pm
- Location: Barry, South Wales
- Contact:
Slight miss fire
Got a slight miss fire, I've been told that the missing might be one of the following:
egr valve
plugs
leads
coil pack
but its only doing it in low revs and it only happens now and again
Any ideas or help guys?.
egr valve
plugs
leads
coil pack
but its only doing it in low revs and it only happens now and again
Any ideas or help guys?.
My corsa sport build thread - http://forums.corsa-b.co.uk/viewtopic.php?t=20200
-
- CB-Uk Newbie
- Posts: 9
- Joined: Sun Apr 21, 2013 10:58 am
Re: Slight miss fire
i had the same thing and eventually the engine management light came on and it was a faulty EGR valve! also mine had an erratic idle.
But to be honest mate i'm no mechanic so don't go buying an EGR valve just because i said! ^_^
But to be honest mate i'm no mechanic so don't go buying an EGR valve just because i said! ^_^
- Harkus
- CB-Uk User
- Posts: 655
- Joined: Mon Nov 10, 2008 4:11 pm
- Location: Barry, South Wales
- Contact:
Re: Slight miss fire
Thanks for the input fella, my mrs neighbour is a mechanic, he looks after her civic so guna get him to look at it for me.
Was going to change the plugs and leads first, EGR valve is about £25 new so will make sure it's defo that first.
Was going to change the plugs and leads first, EGR valve is about £25 new so will make sure it's defo that first.
My corsa sport build thread - http://forums.corsa-b.co.uk/viewtopic.php?t=20200
-
- CB-Uk Newbie
- Posts: 9
- Joined: Sun Apr 21, 2013 10:58 am
Re: Slight miss fire
£25 for a 'new' EGR? :O i paid £85 ! :O haha you sure you dont mean £25 for a used EGR valve?
- Harkus
- CB-Uk User
- Posts: 655
- Joined: Mon Nov 10, 2008 4:11 pm
- Location: Barry, South Wales
- Contact:
Re: Slight miss fire
Possibly is a used one then, had a quick look on ebay must of made a little mistake.
My corsa sport build thread - http://forums.corsa-b.co.uk/viewtopic.php?t=20200
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: Slight miss fire
Blank the egr there stupit anyway buy a blanking plate on ebay
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- Harkus
- CB-Uk User
- Posts: 655
- Joined: Mon Nov 10, 2008 4:11 pm
- Location: Barry, South Wales
- Contact:
Re: Slight miss fire
Not entirely sure what that is fella, could you elaborate for me?.
My corsa sport build thread - http://forums.corsa-b.co.uk/viewtopic.php?t=20200
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: Slight miss fire
Its a thin piece of metal that blocks the egr valve and stops it from putting used gas into your engine
Just type egr valve blanking plate into ebay
What engine do you have
Just type egr valve blanking plate into ebay
What engine do you have
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: Slight miss fire
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- Harkus
- CB-Uk User
- Posts: 655
- Joined: Mon Nov 10, 2008 4:11 pm
- Location: Barry, South Wales
- Contact:
Re: Slight miss fire
1.6 16v sport running 130bhp
My corsa sport build thread - http://forums.corsa-b.co.uk/viewtopic.php?t=20200
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: Slight miss fire
130 at the wheels ? Thats a huge increse
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- Harkus
- CB-Uk User
- Posts: 655
- Joined: Mon Nov 10, 2008 4:11 pm
- Location: Barry, South Wales
- Contact:
Re: Slight miss fire
Yeah mate say's its running 130bhp I bought it from him and he's a genuine guy, good Friend of mine.
Will be getting it put on the Dyno at some point but not until I've put the ct back, 421 manifold and the induction on.
Will be getting it put on the Dyno at some point but not until I've put the ct back, 421 manifold and the induction on.
My corsa sport build thread - http://forums.corsa-b.co.uk/viewtopic.php?t=20200
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: Slight miss fire
Is it mapped ? Also the link i gave is for your car and you unscrew the egr put that in and tighten it back up
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- Harkus
- CB-Uk User
- Posts: 655
- Joined: Mon Nov 10, 2008 4:11 pm
- Location: Barry, South Wales
- Contact:
Re: Slight miss fire
I'm not sure mate all I know is it has a VX inlet fitted, an a Cat Back Stainless Steel Exhaust and a 421 c20xe Manifold to go on.
As I said I'm not entirely sure what its running but im going to go up to GOT BOOST up Swansea an get it dynode.
But want to sort the miss fire out first, just don't know if its the EGR valve, plugs, leads it coil pack.
As I said I'm not entirely sure what its running but im going to go up to GOT BOOST up Swansea an get it dynode.
But want to sort the miss fire out first, just don't know if its the EGR valve, plugs, leads it coil pack.
My corsa sport build thread - http://forums.corsa-b.co.uk/viewtopic.php?t=20200
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: Slight miss fire
Well its only a couple quid so as cheapest id start with it then change plugs then leads
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway