Hi, new member here.
I have a 1999 T reg. 1.2 16v corsa b.
It starts fine but when idleing its at very low revs (below 1000rpm)
and when the engine is cold it cuts out when clutch is down and car is slowing down. (sometimes when warm too)
when the engine is warm the car sometimes revs itself when idleing but not all the time.
I have changed the Idle Control Valve for a brand new one and problem still happens.
All engine management sensors were changed 6 months ago (cam, crank, MAF, accelerator, temperature, lambda).
any help please?
idle trouble and cutting out.
Moderator: Octane2097
-
- CB-Uk Newbie
- Posts: 11
- Joined: Thu Jul 18, 2013 11:01 pm
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: idle trouble and cutting out.
Were the sensors generic or genuine ? Corsas tend to just break genric parts quite quickly
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
-
- CB-Uk Newbie
- Posts: 11
- Joined: Thu Jul 18, 2013 11:01 pm
Re: idle trouble and cutting out.
they were al genuine parts i think, the idol control valve ive just changed is generic, but it was still doing it straight after i changed it so doubt it would have broke it that fast
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: idle trouble and cutting out.
Have you had the codes cleared since replacing the parts
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
-
- CB-Uk Newbie
- Posts: 11
- Joined: Thu Jul 18, 2013 11:01 pm
Re: idle trouble and cutting out.
no i havent, could that be causing it?
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: idle trouble and cutting out.
Yeah if the ecu is storing old codes it could be throwing itself off
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
-
- CB-Uk Newbie
- Posts: 11
- Joined: Thu Jul 18, 2013 11:01 pm
Re: idle trouble and cutting out.
okay i'll get that done and let you know if it works, thanks for the help
-
- CB-Uk Newbie
- Posts: 11
- Joined: Thu Jul 18, 2013 11:01 pm
Re: idle trouble and cutting out.
that didnt work so i changed the idle control valve and throttle sensor for new bosch ones and that did the trick
-
- CB-Uk Newbie
- Posts: 1
- Joined: Sun Apr 28, 2013 6:53 am
Re: idle trouble and cutting out.
but wich one was faulty?