MID bulbs

[Bighed]

I thought they were 509t's but after buying some it would seem I was wrong. The T's seem very close. Which ones do I need?

[johnny]

509t is the correct bulb

[Bighed]

I've got an extra plastic piece either side that's stopping my pushing the bulb in. Hang on, will post a pic

[johnny]

Are you on about the clock ? Yeah getba pic up

[Bighed]

They have an extra pair of plastic bits either side by the bulb which a stopping them fitting into the MID.

[Bighed]

Are you on about the clock ? Yeah getba pic up

Sorry no, the multi info display

[johnny]

Are you on about the clock ? Yeah getba pic up

Sorry no, the multi info display

The corsa doesnt have a multi info display, did you fit it from somthing else

[Bighed]

Sorry. So what's the part on the dash top called with time, temp etc on it?

[johnny]

Sorry. So what's the part on the dash top called with time, temp etc on it?

Aw yeah thats the bit i ment with the clock sorry

Them bulbs should fit just push in its only the metal bit that goes in

[Bighed]

The two plastic "wings" are stopping them

[johnny]

The two plastic "wings" are stopping them

509t is 100% the right bulb so i dont know why it wont go in

[kevinturna]

There should be a gap to cater for the wings, place it in then twist they should stay there pal

[Bighed]

The gap is for the metal contacts to go through to contact on the PCB at the back. These wings are plastic and on the total opposite side to the metal ones

[johnny]

The gap is for the metal contacts to go through to contact on the PCB at the back. These wings are plastic and on the total opposite side to the metal ones

Try a T5 bulb it should work,

Http://pages.ebay.com/link/?nav=item.vi ... 0667320876

[kevinturna]

Or you could get some side cutters, cut the plastic wings off? = profit