X14XE block with c14se head ? will it work or not ?
Moderator: Octane2097
-
- CB-Uk Newbie
- Posts: 23
- Joined: Thu May 23, 2013 12:31 pm
X14XE block with c14se head ? will it work or not ?
hi there just been given a m reg corsa b and engine code is c14se the engine is nackered no.4 cylinder conrod snapped and smashed the sump in and destroyed the block will a X14XE block fit with the c14se head and other parts or not ? thanks regards kieran
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: X14XE block with c14se head ? will it work or not ?
I dout it will fit as the se head is single cam and the block is designed for a twin cam head, if it does fit i cant see it running tbh
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
-
- CB-Uk Newbie
- Posts: 23
- Joined: Thu May 23, 2013 12:31 pm
Re: X14XE block with c14se head ? will it work or not ?
why don't you think that it will run ? it all looks the same
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: X14XE block with c14se head ? will it work or not ?
I just cant imagine a 8v head running with a block designed for 16v head not with out alot of bother
they shouldnt look the same
This is th se
And the xe
they shouldnt look the same
This is th se
And the xe
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
-
- CB-Uk Newbie
- Posts: 4
- Joined: Wed Dec 12, 2012 11:15 am
Re: X14XE block with c14se head ? will it work or not ?
The blocks are all the same, give or take things here and there.
The 8v head will fit but the compression will be higher if you use the x14xe pistons.
The 8v head will fit but the compression will be higher if you use the x14xe pistons.
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: X14XE block with c14se head ? will it work or not ?
I dont think a single cam head will fit a block for double cams the bolt pattern has to be differentMrPsycho wrote:The blocks are all the same, give or take things here and there.
The 8v head will fit but the compression will be higher if you use the x14xe pistons.
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
-
- CB-Uk Newbie
- Posts: 4
- Joined: Wed Dec 12, 2012 11:15 am
Re: X14XE block with c14se head ? will it work or not ?
The 1.3/1.4/1.6 blocks all use the same design, except of course the newer corsa opc/vxr motors. They are similar to the z18xe and x18xe1 motors.
Funny enough the daewoo motors are also interchangable with the opel/vaux equivalent. My corsa 1.3 8v will be receiving a 16v head soon.
Go find a x14xe and c14se head gasket, you'll be pleasantly surprised.
Funny enough the daewoo motors are also interchangable with the opel/vaux equivalent. My corsa 1.3 8v will be receiving a 16v head soon.
Go find a x14xe and c14se head gasket, you'll be pleasantly surprised.