My Mate is having problems with there 1.0l 12v its not idleing as it should sound like it about to cut out and cuts out when brakeing the revs have to be kept at 2k or it will cut out
Ive look at the ICV and cleaned it all out what else could it be ?
1.0L 12V running wrong
Moderator: Octane2097
- rsi-dan
- CB-Uk User
- Posts: 1323
- Joined: Mon Dec 20, 2010 1:06 am
- Location: Crewe
- andy w
- CB-Uk User
- Posts: 4279
- Joined: Wed Sep 18, 2013 10:32 am
- Location: newcastle-under-lyme
Re: 1.0L 12V running wrong
Cud be a block in a vacuum pipe but not sure sounds like starvation of fuel tho if it has to be at 2k sounds like not enough fuel is getting in the system
If it ain't green and black send it back
- rsi-dan
- CB-Uk User
- Posts: 1323
- Joined: Mon Dec 20, 2010 1:06 am
- Location: Crewe
Re: 1.0L 12V running wrong
they took it to a garage after I had looked at the ICV and they said it was 1 tooth out on the timing ?
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: 1.0L 12V running wrong
I'd change the icv, I find they never take to being cleaned
If you start it and let idle for q couple minutes does the eml come on?
If you start it and let idle for q couple minutes does the eml come on?
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- rsi-dan
- CB-Uk User
- Posts: 1323
- Joined: Mon Dec 20, 2010 1:06 am
- Location: Crewe
Re: 1.0L 12V running wrong
No eml light stays off ??johnny wrote:I'd change the icv, I find they never take to being cleaned
If you start it and let idle for q couple minutes does the eml come on?