Atlantis Blue 1.0L

For New & Continuing Projects Only.
NOT for past projects or questions.
Post Reply
User avatar
JamesT0708
CB-Uk User
Posts: 558
Joined: Sun Mar 16, 2014 5:52 am

Re: Atlantis Blue 1.0L

Post by JamesT0708 »

I'm on it then, always wondered about the rear side windows as no-one ever looks through them anyway haha. Just decided to go out and smooth my boot handle on a whim so i'll let you know how it goes. Dunno why I chose to start at 6pm because there's no chance i'll get it done before dark, oh well :D
User avatar
Blackie_No1
CB-Uk User
Posts: 628
Joined: Sat Feb 15, 2014 1:19 pm

Re: Atlantis Blue 1.0L

Post by Blackie_No1 »

Rear side windows can be as dark as you like as it's not a safety feature to see out of them
User avatar
JamesT0708
CB-Uk User
Posts: 558
Joined: Sun Mar 16, 2014 5:52 am

Re: Atlantis Blue 1.0L

Post by JamesT0708 »

Just finished my boot handle and i'm actually pretty impressed considering it's took me less than 3 hours. Gone from this;
Image
Too this in a couple of days only £1.79 down;
Image
Easily 2 of the best things I've done to the car since I got it. They cost me £1.79 between them and took about an hour of actual work to do both. Everyone should do it!

Sent from my GT-I9505 using Tapatalk
User avatar
andy w
CB-Uk User
Posts: 4279
Joined: Wed Sep 18, 2013 10:32 am
Location: newcastle-under-lyme

Re: Atlantis Blue 1.0L

Post by andy w »

From what's been put earlier James my rear sides are 20% tinted and the police ain't ever bothered since i did mine and me and Dan got pressed plates on our cars from a guy on ebay cost £20 and mine turned up a day after i ordered them if ya intrested mate
If it ain't green and black send it back :D
User avatar
JamesT0708
CB-Uk User
Posts: 558
Joined: Sun Mar 16, 2014 5:52 am

Re: Atlantis Blue 1.0L

Post by JamesT0708 »

andy w wrote:From what's been put earlier James my rear sides are 20% tinted and the police ain't ever bothered since i did mine and me and Dan got pressed plates on our cars from a guy on ebay cost £20 and mine turned up a day after i ordered them if ya intrested mate
Gonna have a look at some tint now, cheers mate. My plates were dispatched on Friday so they should be here tomorrow, fingers crossed!
User avatar
andy w
CB-Uk User
Posts: 4279
Joined: Wed Sep 18, 2013 10:32 am
Location: newcastle-under-lyme

Re: Atlantis Blue 1.0L

Post by andy w »

Hopefully mate if its the same guy ne and Dan used they are normally really quick sending them
If it ain't green and black send it back :D
User avatar
andy w
CB-Uk User
Posts: 4279
Joined: Wed Sep 18, 2013 10:32 am
Location: newcastle-under-lyme

Re: Atlantis Blue 1.0L

Post by andy w »

Oh to add the tint i got was a fiver for a 1.5 metre x 300mm uncut length which was plenty enuff on my more door
If it ain't green and black send it back :D
User avatar
JamesT0708
CB-Uk User
Posts: 558
Joined: Sun Mar 16, 2014 5:52 am

Re: Atlantis Blue 1.0L

Post by JamesT0708 »

andy w wrote:Hopefully mate if its the same guy ne and Dan used they are normally really quick sending them
They were £20 so it's probably the same, my plates are s**t atm haha
User avatar
andy w
CB-Uk User
Posts: 4279
Joined: Wed Sep 18, 2013 10:32 am
Location: newcastle-under-lyme

Re: Atlantis Blue 1.0L

Post by andy w »

Mine were mate and ye he probably is did urs have a high pos feed back
If it ain't green and black send it back :D
User avatar
JamesT0708
CB-Uk User
Posts: 558
Joined: Sun Mar 16, 2014 5:52 am

Re: Atlantis Blue 1.0L

Post by JamesT0708 »

andy w wrote:Mine were mate and ye he probably is did urs have a high pos feed back
YEah mate, should have them on tomorrow :wiggle:
User avatar
andy w
CB-Uk User
Posts: 4279
Joined: Wed Sep 18, 2013 10:32 am
Location: newcastle-under-lyme

Re: Atlantis Blue 1.0L

Post by andy w »

Good lad and u ave a shed load of sticky pads for them off the guy aswell
If it ain't green and black send it back :D
User avatar
Barraclough
CB-Uk User
Posts: 2414
Joined: Fri Sep 27, 2013 7:15 pm
Location: Manchester

Re: Atlantis Blue 1.0L

Post by Barraclough »

andy w wrote:Good lad and u ave a shed load of sticky pads for them off the guy aswell
The ones I'm getting come with them sticky pads, are they any good? Lots of the feedback say they fall off so I'm going for the irmscher holder.
User avatar
JamesT0708
CB-Uk User
Posts: 558
Joined: Sun Mar 16, 2014 5:52 am

Re: Atlantis Blue 1.0L

Post by JamesT0708 »

Yeah mine come with the sticky pads but never had any trouble with them before
User avatar
Mike_Parr
CB-Uk User
Posts: 1049
Joined: Tue Feb 24, 2009 6:10 pm
Location: Birmingham, UK

Re: Atlantis Blue 1.0L

Post by Mike_Parr »

Looking a bit euro there mate! Lovely wok!!
Harkus Wrote: Lol I was actually racing a ford focus going through the tunnels making a noise was 5th missed 4th hit 2nd...at 70mph...driving like lad shifting like a woman LOL :lol:
User avatar
JamesT0708
CB-Uk User
Posts: 558
Joined: Sun Mar 16, 2014 5:52 am

Re: Atlantis Blue 1.0L

Post by JamesT0708 »

Mike_Parr wrote:Looking a bit euro there mate! Lovely wok!!
Thanks mate, it'll do until I can get my R34 Skyline ;)
Post Reply