For New & Continuing Projects Only.
NOT for past projects or questions.
-
JamieTee_
- CB-Uk User
- Posts: 1850
- Joined: Wed Feb 26, 2014 6:03 pm
- Location: Manchester
-
Contact:
Post
by JamieTee_ »
Barraclough wrote:Think there's another nut once the wiper arm is off
can't get the wiper arm off that's the problem mate haha
Sent from my mind.
Using Tapatalk
-
Barraclough
- CB-Uk User
- Posts: 2414
- Joined: Fri Sep 27, 2013 7:15 pm
- Location: Manchester
Post
by Barraclough »
Did you take the nut off under the cap? If so try tapping the wiper arm with a hammer while pulling. Worked when my front wiper wouldn't come off.
-
stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Post
by stanc3w0rks »
JamieTee_ wrote:Barraclough wrote:Think there's another nut once the wiper arm is off
can't get the wiper arm off that's the problem mate haha
Sent from my mind.
Sorry didnt realise this was your problem, as said pull hard and tap the dowel with a hammer
Sent from my Corsa B
-
JamieTee_
- CB-Uk User
- Posts: 1850
- Joined: Wed Feb 26, 2014 6:03 pm
- Location: Manchester
-
Contact:
Post
by JamieTee_ »
Yeah took that one off, I'll give it a try when I get home after work, hopefully it'll work though haha!
cheers fella's, will update once it's been done then!
Sent from my mind.
Using Tapatalk
-
stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Post
by stanc3w0rks »
Good look hope you can get it done
Sent from my Corsa B
-
JamesT0708
- CB-Uk User
- Posts: 558
- Joined: Sun Mar 16, 2014 5:52 am
Post
by JamesT0708 »
JamieTee_ wrote:Yeah took that one off, I'll give it a try when I get home after work, hopefully it'll work though haha!
cheers fella's, will update once it's been done then!
Sent from my mind.
I just used brute force. I just pulled it as hard as I could whilst wiggling it to get it loose and it came off pretty easily
Sent from my GT-I9505 using Tapatalk
-
JamieTee_
- CB-Uk User
- Posts: 1850
- Joined: Wed Feb 26, 2014 6:03 pm
- Location: Manchester
-
Contact:
Post
by JamieTee_ »
JamesT0708 wrote:JamieTee_ wrote:Yeah took that one off, I'll give it a try when I get home after work, hopefully it'll work though haha!
cheers fella's, will update once it's been done then!
Sent from my mind.
I just used brute force. I just pulled it as hard as I could whilst wiggling it to get it loose and it came off pretty easily
Sent from my GT-I9505 using Tapatalk
yeah don't wanna break mine
Sent from my mind.
Using Tapatalk
-
JamesT0708
- CB-Uk User
- Posts: 558
- Joined: Sun Mar 16, 2014 5:52 am
Post
by JamesT0708 »
JamieTee_ wrote:JamesT0708 wrote:JamieTee_ wrote:Yeah took that one off, I'll give it a try when I get home after work, hopefully it'll work though haha!
cheers fella's, will update once it's been done then!
Sent from my mind.
I just used brute force. I just pulled it as hard as I could whilst wiggling it to get it loose and it came off pretty easily
Sent from my GT-I9505 using Tapatalk
yeah don't wanna break mine
Sent from my mind.
You won't break it. The only way you'd break it is by snapping it but you just have to hold it close to the motor so there's nowhere for it to snap
Sent from my GT-I9505 using Tapatalk
-
JamieTee_
- CB-Uk User
- Posts: 1850
- Joined: Wed Feb 26, 2014 6:03 pm
- Location: Manchester
-
Contact:
Post
by JamieTee_ »
JamesT0708 wrote:JamieTee_ wrote:JamesT0708 wrote:
I just used brute force. I just pulled it as hard as I could whilst wiggling it to get it loose and it came off pretty easily
Sent from my GT-I9505 using Tapatalk
yeah don't wanna break mine
Sent from my mind.
You won't break it. The only way you'd break it is by snapping it but you just have to hold it close to the motor so there's nowhere for it to snap
Sent from my GT-I9505 using Tapatalk
I'm not fussed about breaking the motor, just if it's rusty underneath I don't wanna crack it off or anything
Sent from my mind.
Using Tapatalk
-
JamieTee_
- CB-Uk User
- Posts: 1850
- Joined: Wed Feb 26, 2014 6:03 pm
- Location: Manchester
-
Contact:
Post
by JamieTee_ »
So today, I'm getting omega sun visors and wiper stalk off my dads car
anything else I could get off it that would come in useful before it goes to the scrap yard!
Sent from my mind.
Using Tapatalk
-
stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Post
by stanc3w0rks »
You getting those lights for in the doors??
Sent from my Corsa B
-
JamieTee_
- CB-Uk User
- Posts: 1850
- Joined: Wed Feb 26, 2014 6:03 pm
- Location: Manchester
-
Contact:
Post
by JamieTee_ »
Puddle lights, yeah got those too
also dewipered now!
tiniest bit of rust on there!
Sent from my mind.
Using Tapatalk
-
andy w
- CB-Uk User
- Posts: 4279
- Joined: Wed Sep 18, 2013 10:32 am
- Location: newcastle-under-lyme
Post
by andy w »
That's pretty good on the rust mate
If it ain't green and black send it back
-
JamieTee_
- CB-Uk User
- Posts: 1850
- Joined: Wed Feb 26, 2014 6:03 pm
- Location: Manchester
-
Contact:
Post
by JamieTee_ »
andy w wrote:That's pretty good on the rust mate
I thought it would be worse but quite glad it's not actually!
Sent from my mind.
Using Tapatalk
-
purpleb
- CB-Uk User
- Posts: 53
- Joined: Sat Jan 04, 2014 2:26 pm
Post
by purpleb »