my rio verde project
- andy w
- CB-Uk User
- Posts: 4279
- Joined: Wed Sep 18, 2013 10:32 am
- Location: newcastle-under-lyme
Re: my rio verde project
So as u guys no one of the problems ive had with my more door is the colour match everytime ive had a colour made uts turned to dark. The last time was for pvs and the back door stuck out like a sore thumb so when i had some made up to replace it they put more yellow in as my paint is a mix of silver,green and yellow so did a test patch and was just to light but the wired part is when i add a coat to the paint that was too dark it makes the match 99.999% perfect its so close that ya cant even see the difference in paint so finally i can make the more door look how it shud and not the eye sore it is atm so im defo happy with this out come but my tapatalk still wont add pics to show it so as soon as i can i will put it up to show u guys the only down side i now ave to get two tins everytime i want to spray anything but i prefer do that than ave a crappy colour looking car next to do now on the external is start to sticker bomb the bonnet as soon as i ave ordered the vinyl so watch this space and goin to be good pics when they are added and all comments that u guys want to add at any time are forever welcomed by my thanks for reading and watch this space hahaha
If it ain't green and black send it back
- Mike_Parr
- CB-Uk User
- Posts: 1049
- Joined: Tue Feb 24, 2009 6:10 pm
- Location: Birmingham, UK
Re: my rio verde project
Sounds good Andy. Hurry up and get them pictures up!
Are you sure sticker bombing is the way forward with this project? They get old pretty quick tbfh, but saying that are you going for the Vauxhall themed' bomb?
Are you sure sticker bombing is the way forward with this project? They get old pretty quick tbfh, but saying that are you going for the Vauxhall themed' bomb?
Harkus Wrote: Lol I was actually racing a ford focus going through the tunnels making a noise was 5th missed 4th hit 2nd...at 70mph...driving like lad shifting like a woman LOL
- stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Re: my rio verde project
Yeah mate i loved my stickervomb at the start but i really dont anymore :/
Sent from my Nokia 3210
Sent from my Nokia 3210
- Mike_Parr
- CB-Uk User
- Posts: 1049
- Joined: Tue Feb 24, 2009 6:10 pm
- Location: Birmingham, UK
Re: my rio verde project
Oh my?! Nokia 3210? What's this? 2001? hahahahaaaaastanc3w0rks wrote:Yeah mate i loved my stickervomb at the start but i really dont anymore :/
Sent from my Nokia 3210
Harkus Wrote: Lol I was actually racing a ford focus going through the tunnels making a noise was 5th missed 4th hit 2nd...at 70mph...driving like lad shifting like a woman LOL
- stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Re: my rio verde project
Hahaha i've been waiting for someone to see that
Sent from my Nokia 3210
Sent from my Nokia 3210
- andy w
- CB-Uk User
- Posts: 4279
- Joined: Wed Sep 18, 2013 10:32 am
- Location: newcastle-under-lyme
Re: my rio verde project
So deciding to change the more doors colour as kinda got bored of it now lol. Do lookin on the old interweb and seen videos of roller painting cars and the end product and all i can say is wow. So what colour so u guys think wud be good on my more door and bare in mind im going to have a cartoon sticker bomb bonnet,black gloss roof so ideas from everyone welcome on this
If it ain't green and black send it back
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: my rio verde project
Black because black is badass
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Re: my rio verde project
Are you going roller painting? I can tell you now its amazingly hard to get anywhere near a half decent finish on it. I know because i roller painted my roof and it makes me want to cry so going to vinyl it as soon as i can.
Sent from my Nokia 3210
Sent from my Nokia 3210
- andy w
- CB-Uk User
- Posts: 4279
- Joined: Wed Sep 18, 2013 10:32 am
- Location: newcastle-under-lyme
Re: my rio verde project
Ye mate seen it done before and seen videos on u tube. I no where ya comin from did u use a pile roller or a gloss roller? And did ya sand in between coats
If it ain't green and black send it back
- andy w
- CB-Uk User
- Posts: 4279
- Joined: Wed Sep 18, 2013 10:32 am
- Location: newcastle-under-lyme
Re: my rio verde project
So heres the door so far on the left is the front door and the right is unlaquered new paint what u guys think closer than before
Sent from my Windows Phone 8S by HTC using Tapatalk
Sent from my Windows Phone 8S by HTC using Tapatalk
If it ain't green and black send it back
- andy w
- CB-Uk User
- Posts: 4279
- Joined: Wed Sep 18, 2013 10:32 am
- Location: newcastle-under-lyme
Re: my rio verde project
This is what will be on the bonnet within the next week or so what's everyone think of it
If it ain't green and black send it back
- stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Re: my rio verde project
I dont know it was a foam roller anyway, and no i didnt sand between coats so maybe thats why i hate mine lol. How are you going to do the engine bay and door shuts etc?andy w wrote:Ye mate seen it done before and seen videos on u tube. I no where ya comin from did u use a pile roller or a gloss roller? And did ya sand in between coats
Sent from my Nokia 3210
- andy w
- CB-Uk User
- Posts: 4279
- Joined: Wed Sep 18, 2013 10:32 am
- Location: newcastle-under-lyme
Re: my rio verde project
Well it says u can brush it unthinned out and sand it down but its a little harder. So it will be either that way or a small headed gloss foam roller and a lot of time todo it in
If it ain't green and black send it back
- andy w
- CB-Uk User
- Posts: 4279
- Joined: Wed Sep 18, 2013 10:32 am
- Location: newcastle-under-lyme
Re: my rio verde project
Also u not to make sure its the lightest pressure applied and no air bubbles in the paint as well as no trail marks
If it ain't green and black send it back
- stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Re: my rio verde project
Yeah i thought ot was all going great but its impossible to avoid the lines best of luck with it lad i think a nice brown would look good and would be differant
Sent from my Nokia 3210
Sent from my Nokia 3210