How do you remove air box as I want to drill it but I unscrewed all the screws and it didn't wanna move, also does It pass MOT with a drilled airbox cos mine is soon lol
Gand
Airbox
Moderator: Octane2097
- stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Re: Airbox
My airbox wasn't screwed in so are you sure you're looking at the right thing? It will pass aslong as you cant see the holes
Sent from my Nokia 3210
Sent from my Nokia 3210
- coupe77
- CB-Uk User
- Posts: 597
- Joined: Tue Mar 11, 2014 3:52 pm
- Location: manchester
Re: Airbox
It will pass with a drilled air box
But you can get heat soak that can cause flat spots
You are best to de restrict it and fit a panel filter
Sent from my iPhone using Tapatalk
But you can get heat soak that can cause flat spots
You are best to de restrict it and fit a panel filter
Sent from my iPhone using Tapatalk
https://www.facebook.com/pages/Jeacotts-motors/611022572351820
- diggerhole
- CB-Uk User
- Posts: 412
- Joined: Sun Feb 03, 2013 1:46 am
Re: Airbox
A good service. Oil change and new air and oil filters will make more of a difference. Once you can eat your dinner of the engine and all fluids are fresh and erg hoses checked, all you're doing is trashing your air box.
-
- CB-Uk User
- Posts: 71
- Joined: Wed May 28, 2014 2:28 pm
Re: Airbox
stanc3w0rks wrote:My airbox wasn't screwed in so are you sure you're looking at the right thing? It will pass aslong as you cant see the holes
Sent from my Nokia 3210
Yeah sorry found out that was only the top half don't know how to get the whole thing out though
Gand
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: Airbox
There's a plastic screw that doesn't look like a screw, it's front middle of the box
All drilling an airbox does is give induction noise without doing damage to your maf, make sure to.only drill the wing side so there no heat soak from the engine and dont drill above the filter obviously
All drilling an airbox does is give induction noise without doing damage to your maf, make sure to.only drill the wing side so there no heat soak from the engine and dont drill above the filter obviously
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Re: Airbox
It does leave a flat spot for me, when the engine is hot and im in first gear and sink the shoe it goes nowhere just chuggs along for a second
Sent from my Nokia 3210
Sent from my Nokia 3210
-
- CB-Uk User
- Posts: 71
- Joined: Wed May 28, 2014 2:28 pm
Re: Airbox
Right ok thanks I'll have a look for that tomorrow, sorry for the stupid questions guys I'm very new to all this, and I've read up about that heat soak too. I'll be sure to only drill wing side, and tbh that's all I want is the noise at the moment, it's just a free mod and hopefully sounds better than it does now lol, and stanceworks have you got a flat spot from even drilling the wing side? You two know your stuff haha, appreciate the help.
Gand
Gand
- stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Re: Airbox
I only drilled the wing side and it only happens when the engine temp is near 100°. Dosent sound loud or anything but when you tear the arse off the car it sounds like an induction kit lol
Sent from my Nokia 3210
Sent from my Nokia 3210