fuel pressure regulators

Help and advice section for technical questions on your Corsa.
Please check that your query hasn't already been answered in FAQ and Technical Info section.

Moderator: Octane2097

Post Reply
jessica
CB-Uk Newbie
Posts: 2
Joined: Wed Oct 01, 2014 3:06 pm

fuel pressure regulators

Post by jessica »

Need information on two specific fuel regulators,

Z22SE fuel regulator without vacuum tube,
And the Fuel redulator of the Corsa Vxr A16LEH

What pressure Each of them ?
I think but not sure the 2.2 is 3.8 bar
And abot the 1.6 corsa VXR I can't find any info in the Web.
User avatar
johnny
Senior Moderator
Posts: 4875
Joined: Sun Jul 08, 2012 4:26 am
Location: Donegal,Ireland

Re: fuel pressure regulators

Post by johnny »

A163LER has 3.3 bar I think and z22se has 3.7-4 bar
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway :thumbs:
jessica
CB-Uk Newbie
Posts: 2
Joined: Wed Oct 01, 2014 3:06 pm

Re: fuel pressure regulators

Post by jessica »

3.3 and 3.7 bar, Interesting :thumbs:

the z22se built in a different way, there is no vacuum Tube on the regulator valve
It's supposed to be critical?

and I have another question, If I'm not bothering..
the Regulator - maximum point on 3.7 bar - and 3.4 consistently runing Normally
or Permanently or 3.7 without Reduce the pressure change?
User avatar
johnny
Senior Moderator
Posts: 4875
Joined: Sun Jul 08, 2012 4:26 am
Location: Donegal,Ireland

Re: fuel pressure regulators

Post by johnny »

jessica wrote:3.3 and 3.7 bar, Interesting :thumbs:

the z22se built in a different way, there is no vacuum Tube on the regulator valve
It's supposed to be critical?

and I have another question, If I'm not bothering..
the Regulator - maximum point on 3.7 bar - and 3.4 consistently runing Normally
or Permanently or 3.7 without Reduce the pressure change?
The 2,2 does use a vacuum it's when it's at low revs it runs much more economical and then at full throttle or at a certain rpm it uses the full 3.7 bar

I don't really understand the question but the pressure isn't adjustable if that's what your asking, you can buy aftermarket adjustable regulators but the standard ones just run constant bar, apart from the 2.2 as mentioned
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway :thumbs:
Post Reply