Need information on two specific fuel regulators,
Z22SE fuel regulator without vacuum tube,
And the Fuel redulator of the Corsa Vxr A16LEH
What pressure Each of them ?
I think but not sure the 2.2 is 3.8 bar
And abot the 1.6 corsa VXR I can't find any info in the Web.
fuel pressure regulators
Moderator: Octane2097
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: fuel pressure regulators
A163LER has 3.3 bar I think and z22se has 3.7-4 bar
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
-
- CB-Uk Newbie
- Posts: 2
- Joined: Wed Oct 01, 2014 3:06 pm
Re: fuel pressure regulators
3.3 and 3.7 bar, Interesting
the z22se built in a different way, there is no vacuum Tube on the regulator valve
It's supposed to be critical?
and I have another question, If I'm not bothering..
the Regulator - maximum point on 3.7 bar - and 3.4 consistently runing Normally
or Permanently or 3.7 without Reduce the pressure change?
the z22se built in a different way, there is no vacuum Tube on the regulator valve
It's supposed to be critical?
and I have another question, If I'm not bothering..
the Regulator - maximum point on 3.7 bar - and 3.4 consistently runing Normally
or Permanently or 3.7 without Reduce the pressure change?
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: fuel pressure regulators
The 2,2 does use a vacuum it's when it's at low revs it runs much more economical and then at full throttle or at a certain rpm it uses the full 3.7 barjessica wrote:3.3 and 3.7 bar, Interesting
the z22se built in a different way, there is no vacuum Tube on the regulator valve
It's supposed to be critical?
and I have another question, If I'm not bothering..
the Regulator - maximum point on 3.7 bar - and 3.4 consistently runing Normally
or Permanently or 3.7 without Reduce the pressure change?
I don't really understand the question but the pressure isn't adjustable if that's what your asking, you can buy aftermarket adjustable regulators but the standard ones just run constant bar, apart from the 2.2 as mentioned
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway