ripspeed dvd player

Help and advice section for technical questions on your Corsa.
Please check that your query hasn't already been answered in FAQ and Technical Info section.

Moderator: Octane2097

stacey-1988
CB-Uk User
Posts: 64
Joined: Fri Dec 19, 2014 8:43 pm

ripspeed dvd player

Post by stacey-1988 »

tryin to instal a ripspeed dvd player in my car and its nt fittin cause of a metal frame someone said too cut it is tht possible? please help?!?!
User avatar
coupe77
CB-Uk User
Posts: 597
Joined: Tue Mar 11, 2014 3:52 pm
Location: manchester

Re: ripspeed dvd player

Post by coupe77 »

If you got it new you should have to prongs that slide down the sides to release the metal cage it will then slide off don't cut it as you will need this too unit it in


Sent from my iPhone using Tapatalk
https://www.facebook.com/pages/Jeacotts-motors/611022572351820
stacey-1988
CB-Uk User
Posts: 64
Joined: Fri Dec 19, 2014 8:43 pm

Re: ripspeed dvd player

Post by stacey-1988 »

its nt the cage of the dvd player its like a steel bar in were headunit goes
stacey-1988
CB-Uk User
Posts: 64
Joined: Fri Dec 19, 2014 8:43 pm

Re: ripspeed dvd player

Post by stacey-1988 »

any one got 1998 1.2 8v
User avatar
stanc3w0rks
CB-Uk User
Posts: 3303
Joined: Tue Feb 18, 2014 4:08 pm
Location: mayo, ireland

Re: ripspeed dvd player

Post by stanc3w0rks »

I have a 97 1.2 8v. I wouldnt cut that bar its usually where the headunit is earthed.
stacey-1988
CB-Uk User
Posts: 64
Joined: Fri Dec 19, 2014 8:43 pm

Re: ripspeed dvd player

Post by stacey-1988 »

so the dvd player will have to sit out abit then no chance getn her fitted proper?
User avatar
stanc3w0rks
CB-Uk User
Posts: 3303
Joined: Tue Feb 18, 2014 4:08 pm
Location: mayo, ireland

Re: ripspeed dvd player

Post by stanc3w0rks »

Its probably all the wirws bunched up in the back causing it to sit so far out, its really fiddly trying to keep them out of the way while puahing the head unit in.
User avatar
andy w
CB-Uk User
Posts: 4279
Joined: Wed Sep 18, 2013 10:32 am
Location: newcastle-under-lyme

Re: ripspeed dvd player

Post by andy w »

If its a wire issue with this problem ya got then i agree with stance mate my stereo did stick out cus of the blocks and i had to feed the wires into place first then connect the stereo also unscrew the ash tray so ya can get ur hands behind the stereo aswell
If it ain't green and black send it back :D
stacey-1988
CB-Uk User
Posts: 64
Joined: Fri Dec 19, 2014 8:43 pm

Re: ripspeed dvd player

Post by stacey-1988 »

did u eventually get her fitted properly? yeah ive ashtray n tht out im not that patient probably take couple hours
User avatar
andy w
CB-Uk User
Posts: 4279
Joined: Wed Sep 18, 2013 10:32 am
Location: newcastle-under-lyme

Re: ripspeed dvd player

Post by andy w »

Yes i did but if ya look inside where the stereo goes the is a plate with a screw hole in it push that back and it will fit mine did hope this helps
If it ain't green and black send it back :D
stacey-1988
CB-Uk User
Posts: 64
Joined: Fri Dec 19, 2014 8:43 pm

Re: ripspeed dvd player

Post by stacey-1988 »

is the plate attached to the strengthener bar?
User avatar
andy w
CB-Uk User
Posts: 4279
Joined: Wed Sep 18, 2013 10:32 am
Location: newcastle-under-lyme

Re: ripspeed dvd player

Post by andy w »

Ye mate that the one i hit it further bak as my stereo hit that so when done it shud give u a few more mm play room also if the bak of the stereo has a pin in the bak unbolt it aswell as that stopped mine
If it ain't green and black send it back :D
User avatar
stanc3w0rks
CB-Uk User
Posts: 3303
Joined: Tue Feb 18, 2014 4:08 pm
Location: mayo, ireland

Re: ripspeed dvd player

Post by stanc3w0rks »

andy w wrote:Ye mate that the one i hit it further bak as my stereo hit that so when done it shud give u a few more mm play room also if the bak of the stereo has a pin in the bak unbolt it aswell as that stopped mine
Pretty sure that the bolt in back of radio is supposed to go into the bar and act as an earth.
User avatar
andy w
CB-Uk User
Posts: 4279
Joined: Wed Sep 18, 2013 10:32 am
Location: newcastle-under-lyme

Re: ripspeed dvd player

Post by andy w »

Think it is but i never had any issues with it and the corsa has a earth wire on the harness so the aint no need for it tbh but that was the way i got my stereo to fit with no issues
If it ain't green and black send it back :D
User avatar
stanc3w0rks
CB-Uk User
Posts: 3303
Joined: Tue Feb 18, 2014 4:08 pm
Location: mayo, ireland

Re: ripspeed dvd player

Post by stanc3w0rks »

andy w wrote:Think it is but i never had any issues with it and the corsa has a earth wire on the harness so the aint no need for it tbh but that was the way i got my stereo to fit with no issues
Didn't know they had an earth wire. I had problems with my head unit cutting out whenever i hit a bump, but i sorted it by running a bit of speaker wire from the back of the headunit to an earth.
Post Reply