Silver Corsa B

[TheFinnMill]

I'll have to try this petrol trick, the hairdryer I have isn't that good, should probably invest in a heat gun at some point


Sent from my iPhone using Tapatalk

[stanc3w0rks]

ive never even heard of that or thought about it but it sounds canny ingeneus like!

It also helps for de-tarring. Halfords sell 'sticky stuff remover' which is meant to be top stuff.

[Teastick]

I found a heat gun and a old bank card works quite well aswell as using bug and tar remover from halfrauds

[TheFinnMill]

Done a few things over the last week, new exhaust, alloys, bonnet bra and wrapped the roof black. I know not everybody is keen on bonnet bras but as it covers the awful attempt at the fix the last owner tried I'm happy with it.
Not happy in the slightest with the roof wrap so will need to be redone but for now it'll do.
Love the wheels as they are!
Need lowering springs and a few little bits and for exterior work I'll consider it done.


Sent from my iPhone using Tapatalk

[Barraclough]

Be careful with the bonnet bra, Iv had a few and got sick of them getting full with rain lol

[diggerhole]

Got to love a bra

[johnny]

Got to love a bra

Hooks on can be awkward to get off sometimes though

[diggerhole]

I like the way a good bra frames the headlights

[scorpiotn1]

Got round to pulling it out the garage today, really struggling to get the crap off from the bump strip, anyone have way which is easier?

Also swapped out my air filter box for a mushroom filter
https://vimeo.com/115178080 Stock exhaust with the air filter.

Also messed about editing a picture of the rear, tinting the rear lights 100% doing that as soon as I can, along with Alloys after Christmas, thinking Cav slabs or Expressions, not too sure yet, want to wrap my roof in black, wind deflectors, new steering wheel and thinking about Astra GSI bonnet vents but also not too sure


Sent from my iPhone using Tapatalk

toffee wheel from ebay.

I done mine with a heat gun and plastic fishing wire to remove the bump strips, then used polish compund and a clean rag to rub hard. anything that was left used toffee wheel to clean it off then another polish.

http://www.ebay.co.uk/itm/STRIPE-REMOVI ... 25972339b1


also page 35 and 36 on my project log might help you out mate..

https://www.corsa-b.uk/forum/viewtopic. ... &start=510

http://www.meguiars.co.uk/product/200/U ... -Compound/

[TheFinnMill]

Already removed one side now,
Used the sticky stuff removed from halfords, still took ages, not got the energy to do the other side


Sent from my iPhone using Tapatalk

[TheFinnMill]

Oh and who knows what the mark underneath is? Is there anyway to get rid of it?


Sent from my iPhone using Tapatalk

[johnny]

That's condensation under the lacquer, you can try get rid of it with a heat gun but it won't go with out sanding and re painting

[Westley]

Yeah it's condensation as Johnny said! I had the exact same on my C and I used a heat gun and it was all gone and clear in no time and it looks perfect [emoji106]


Sent from my iPhone using Tapatalk

[TheFinnMill]

I think it's about time for an update, not done much recently, been quite busy with other things but firstly, ordered a new radiator and got that fitted
Old one had a nice hole in also bought some stickers to take your eye away from where the bump strips were
I also bought a little C'mon toy, my car now has a mascot! I have also colour coded the wing mirrors, black just looked cheap and tacky in my eyes Now since I bought the car I've had a new battery, I say new, it was stolen out of my mums old car when she wrote it off, the old battery never had life in it and this one was working fine, until recently when it's not holding charge Is this because it's sat there and the battery is having build up on the plates inside or is it coming from something else, it jump starts fine and runs fine Aswell.
I've also seen a cheap B up the road from me, he wants £350 but the MOT has just ran out and it's been for sale since October, in serious consideration to buy it, I have no place to store it but I wouldn't mind two projects at the same time!
Anyway, next on the list is get the starting problem sorted and get some welding done on it and then send it for its MOT!


Sent from my iPhone using Tapatalk

[TheFinnMill]

Just a small update, started stripping out all the old interior as it was dirty, stained and damp from being sat in my garage for so long

I've also ordered some Seats, Red Buckets.
I was going to get a new steering wheel as well but it's out of stock the one I want, getting my self booked in for a tattoo then with what money I have after that I'll buy harnesses, fit a false floor and hopefully have enough left for some 60mm springs.
I also stopped off last night at halfords on my way home, always a mistake, come away every time with something I had no intention in buying, but as my speakers are in awful condition I invested in some new ones.


Sent from my iPhone using Tapatalk