Dials came today mate and I've just come round to look at them properly.
Just need a bit of advice and help.
Am I right in thinking that the plain black wire pointed out is the one I put to earth?
And I assume the blue wire in the photo is for the live feed? But I have one open end wire and a spade type connector coming out of that also!?
If you can help us out mate? Or anybody else knows?
Many thanks.......
Cal Walker
Corsa B/1.4 16v/Sport/X14XE
Project Thread: White X14XE
Dials came today mate and I've just come round to look at them properly.
Just need a bit of advice and help.
Am I right in thinking that the plain black wire pointed out is the one I put to earth?
And I assume the blue wire in the photo is for the live feed? But I have one open end wire and a spade type connector coming out of that also!?
If you can help us out mate? Or anybody else knows?
Many thanks.......
Did a.wiring diagram of any kind come with it? I've only fitted one set for a mate and it only had 2 wires but it's spliced into your power so I'm kind of confused as to what it's for because I can't see it doing anything unless it's for a separate switch so you can turn them on without the lights being on
But pictures of any sort of diagram they sent can.only help
JamieTee_ wrote:Bit of a topic steal here
anyone know if I could brighter LED's for my clocks rather than the dim blue ones I've got at the minute
Sent from my mind.
Smd's in any colour other than blue, blue is the worst possible colour for light output, reds greens white are best because they have 0% blue light
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
No wiring diagram at all buddy! Hence why I'm a bit confused.
That's the only thing I can think of also is that the spade connection was for a second switch. I'll try putting the blue wire and black wire on a 12v battery later today and see what happens.
Cheers......
Cal Walker
Corsa B/1.4 16v/Sport/X14XE
Project Thread: White X14XE
Right sorry for replying on an old thread, I'm in desperate assistance!
Just fitted my plasma dials and wired them in as the picture Johnny posted, they work and light up when I turn the lights on, but as soon as I turn the ignition on the go out!!?? So they work when the ignition is off, but go out when the ignition is turn on. Can anybody please help me asap please!
Many thanks.....
Cal Walker
Corsa B/1.4 16v/Sport/X14XE
Project Thread: White X14XE
You should have connected the earth to brown. On vauxhall red is perm live. Black ignition live. Brown earth. Sounds like you have connected the feed to them to the side lights and the earth to black. Common mistake on vauxhalls
