Wiring...
Moderator: Octane2097
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: Wiring...
Is it a small loom with a single plug?
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Re: Wiring...
Could it be for heated seats?
Sent from my GT-I8200N using Tapatalk
Sent from my GT-I8200N using Tapatalk
-
- CB-Uk Newbie
- Posts: 13
- Joined: Tue Oct 13, 2015 9:36 pm
Re: Wiring...
yeah its a wee three pin single plug.
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: Wiring...
More than likely heated seats loom
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
-
- CB-Uk Newbie
- Posts: 13
- Joined: Tue Oct 13, 2015 9:36 pm
Re: Wiring...
i dont have the front seat loom though...
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: Wiring...
What do you mean? That plug would be for the front seats
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
-
- CB-Uk Newbie
- Posts: 13
- Joined: Tue Oct 13, 2015 9:36 pm
Re: Wiring...
i dont have the plugs behind the air recirc trim for the heated seat switches......
- stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Re: Wiring...
I thought all looms were the same for all models?
Sent from my GT-I8200N using Tapatalk
Sent from my GT-I8200N using Tapatalk
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: Wiring...
Yeah all looms are the same so the loom for heated seats will be there but not necessarily the plugs in the dash, the wires and maybe plugs will be taped up somewhere
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
-
- CB-Uk Newbie
- Posts: 13
- Joined: Tue Oct 13, 2015 9:36 pm
Re: Wiring...
sweet, didnt know that, gonna have a dig when i take his dash out to put in the new backlighting
- diggerhole
- CB-Uk User
- Posts: 412
- Joined: Sun Feb 03, 2013 1:46 am
Re: Wiring...
Two threads... and an almost identical answer...[emoji13]
The wiring for the rear will end in the passenger footwell behind the kick panel. This would be the best place to look for it to start. The Corsa and Combo are effectively 5 looms. Engine, dashboard, rear and 2 door looms . The main 3 all meet up in a big block connector in the footwell. So you may well have the block by the b piller but for cost saving no front wiring. Time to break out the multimeter.
Sent from my SM-G928F using Tapatalk
The wiring for the rear will end in the passenger footwell behind the kick panel. This would be the best place to look for it to start. The Corsa and Combo are effectively 5 looms. Engine, dashboard, rear and 2 door looms . The main 3 all meet up in a big block connector in the footwell. So you may well have the block by the b piller but for cost saving no front wiring. Time to break out the multimeter.
Sent from my SM-G928F using Tapatalk