Hello.
My first post so go easy guys
I own a corsa b non eps. I want to fit a corsa b eps system to my corsa b. Is it a straight fit or do I need modified brackets?.
corsa b non eps to corsa b eps
-
bonecrusher
- CB-Uk Newbie
- Posts: 2
- Joined: Sat Apr 19, 2014 10:27 am
-
coupe77
- CB-Uk User
- Posts: 597
- Joined: Tue Mar 11, 2014 3:52 pm
- Location: manchester
Re: corsa b non eps to corsa b eps
The Column should fit you will need the ecu
Ecu loom it your speedo is cable drive you will need a speed sensor as the eps gets a signal from this you will also need a light to complete the circuit
Sent from my iPhone using Tapatalk
Ecu loom it your speedo is cable drive you will need a speed sensor as the eps gets a signal from this you will also need a light to complete the circuit
Sent from my iPhone using Tapatalk
https://www.facebook.com/pages/Jeacotts-motors/611022572351820
-
bonecrusher
- CB-Uk Newbie
- Posts: 2
- Joined: Sat Apr 19, 2014 10:27 am
Re: corsa b non eps to corsa b eps
Hello guys
I have upgraded my vehicle to EPS. I managed to locate a complete set on Ebay. Took me a year to find the time to install it. It is working well.
On to my next issue.
My steering rack on my car is noisy as well as it is a 4 turn lock to lock. I need to upgrade the rack and pinion. Does anybody have a part number for a rack and pinion from a V reg corsa 1.2 16v apparently these vehicles have a 2.5 turn lock to lock.
I have upgraded my vehicle to EPS. I managed to locate a complete set on Ebay. Took me a year to find the time to install it. It is working well.
On to my next issue.
My steering rack on my car is noisy as well as it is a 4 turn lock to lock. I need to upgrade the rack and pinion. Does anybody have a part number for a rack and pinion from a V reg corsa 1.2 16v apparently these vehicles have a 2.5 turn lock to lock.