red top

[amanda]

hi guys just a quick question my boyfriend is gettin rid of his cav sri, he says i can have it for the red top engine, but says that the sfi box will not fit in the corsa engine bay and will need modified. should i get a Courtney sport power cap or not?

[sach]

i think u need the power cap

[sach]

read this:

http://www.corsa-b.co.uk/viewtopic.php?t=986


\"SFi air box:
Early C20XE SFi boxes are small enough to fit without modification, later models had a different shape and need modifying to clear the bulkhead behind, to do this, cut the section out that is required and hot-glue gun a flat section of plastic and make sure its airtight (important). The Ecotec engines do not have a large box on the throttle body, hence no modification is required. C20LET Turbo engines have a different method, hence no modification is required (in fact this can be transferred over to the C20XE engines instead of modifying the SFi box). Also PVD sell a replacement part - a power cap (£95) that fits (looks exactly like the C20LET part).\"

[j1400]

No the SFi box doesn\'t fit
and the mantzel powercap also doens\'t fit you need to tirm the bulk head.
You need the ecotec pipe adapator from V-tunign or alike.

I have a supplier for these and can do one for £35 all in.

[davie_16v]

yip go for the ecotec pipe thats what im using on my corsa and its a lot less hassle and works fine

davie

j1400 do you have the plate that goes on the throttlebody and the bolts?

davie

[j1400]

It\'s just the plate for the ecotec pipe to go on to, then I use 6mm nyloc nuts from halfords and washers, and a thin smear of bathroom sealant goes round the top of the TB and bolt it down, less is more though.