I did have pics, can\'t find them. No biggie just look under the car - it\'s at the very front most part of your bodywork where the tie bar brackets mount.
3 bolts on each bracket (bracked is in a U shape) with the tie bar going through the middle with a nut on the end.
clonking noise
Moderator: Octane2097
-
- CB-Uk User
- Posts: 1367
- Joined: Fri Jun 10, 2005 7:29 pm
- Location: Peterborough
clonking noise
No more Corsa :(
-
- CB-Uk Newbie
- Posts: 29
- Joined: Tue Jun 07, 2005 10:26 pm
i hv the same problems
hiya i have a clonking noise and a whinning noise and my mechanic has said that the whinning noise is a ball bearing in my clutch which makes a noise all the time especially louder when first starting off and the clonking noise is comin from my passenger side and is said to be the cv joint.
-
- CB-Uk User
- Posts: 1367
- Joined: Fri Jun 10, 2005 7:29 pm
- Location: Peterborough
-
- CB-Uk Newbie
- Posts: 29
- Joined: Tue Jun 07, 2005 10:26 pm
clonking noise
yeha well i dunt hv any money my alternaters just burnt out so i fink thats more of a problem that the clutch and the cv joint which has a bit of life still in them
-
- CB-Uk User
- Posts: 179
- Joined: Thu Jul 07, 2005 1:17 pm
- Location: kidderminster
clonking noise
[quote=\"broster\"]look under the front of the car....just under the bumper there is a metal beam, right at the bottom at the front, it has 2 backkets bolted to it! those are the bushes that will make the noise![/quote]
Na there sound mate.
Na there sound mate.
-
- CB-Uk User
- Posts: 179
- Joined: Thu Jul 07, 2005 1:17 pm
- Location: kidderminster
Re: i hv the same problems
[quote=\"chrissycowan\"]hiya i have a clonking noise and a whinning noise and my mechanic has said that the whinning noise is a ball bearing in my clutch which makes a noise all the time especially louder when first starting off and the clonking noise is comin from my passenger side and is said to be the cv joint.[/quote]
Well, Ive just found out the whinning noise is cambelt tennsior. Now booked in to have cambelt/tennsior/bearings changed, wlist hes doin that, I\'ll ask to check that clonking noise.
Well, Ive just found out the whinning noise is cambelt tennsior. Now booked in to have cambelt/tennsior/bearings changed, wlist hes doin that, I\'ll ask to check that clonking noise.
-
- CB-Uk Newbie
- Posts: 29
- Joined: Tue Jun 07, 2005 10:26 pm
clonking noise
ok thank ya well im nt being horrible bt at the mo i fink corsa are crap but thats only cos mines bin in the garage for ages and my opionion on them isnt that hot bt i love mine really bt its taking so bluddy long
-
- CB-Uk User
- Posts: 1367
- Joined: Fri Jun 10, 2005 7:29 pm
- Location: Peterborough
-
- CB-Uk User
- Posts: 236
- Joined: Thu Apr 14, 2005 10:23 pm
- Location: Buxton Derbyshire NorthWest
clonking noise
It\'s the way of everything in this world m8
You go thru periods of paying money and then stages where you don\'t
as cars get older more bits are worn etc
mines currently in for new wheel bearings
not good weeks before going in body shop for a make over!
You go thru periods of paying money and then stages where you don\'t
as cars get older more bits are worn etc
mines currently in for new wheel bearings
not good weeks before going in body shop for a make over!