Help and advice section for technical questions on your Corsa.
Please check that your query hasn't already been answered in FAQ and Technical Info section.
Ok silly question how would you put in new foot pedals (i\'ve searched the forums for a good 10 mins and can\'t find any subject with it)
well it looks easy to me but can anyone tell me if its as easy as the instruction tells you (drill a clearance hole... ) Do i need some sort of special drill? or just any drill with a special drill piece to go through metal... (AM I MAKING ANY SENSE?!?! lol) All help appreciated!
Cheers
MonkeeBoy
Lists of mods:Type VR enclosed induction kit, Corner splitters (front), 15"Alloys Wider than standard wheelies, front and rear strut brace, JBL front speakers, JBL 6x9's, 4-2-1exhaust manifold, Catbacksystem+backbox, Pipercross crankcase breather, alarm system(unkown i forgot!! :(), Bilsein sports kit 40mm allround...
I fitted a set on the Nova once. First attempt I realised the pedal needed to be supported.. otherwise it just goes down when you drill.
Second attempt was with using tins of beans stacked to the desired height, drill slipped, I drilled a tin...
Third attempt I wasn\'t going anywhere... drilling through the point where the lever met the pedal..
Fourth attempt I got them fitted but they were metal Sparco items and driving with wet feet wasn\'t clever.
If you get decent pedals with rubber inserts, then do it.
[quote=\"Joff\"]I fitted a set on the Nova once. First attempt I realised the pedal needed to be supported.. otherwise it just goes down when you drill.
Second attempt was with using tins of beans stacked to the desired height, drill slipped, I drilled a tin...
Third attempt I wasn\'t going anywhere... drilling through the point where the lever met the pedal..
Fourth attempt I got them fitted but they were metal Sparco items and driving with wet feet wasn\'t clever.
If you get decent pedals with rubber inserts, then do it.[/quote]
Yeah i got Rubber inserts they\'re Ripspeed ones lol (gf bought them for me!! )
So i just have to have something supporting the pedals (so they won\'t go down whiles drilling...) does it work if you drill with one hand and hold the pedal up with the other?
Anyways gonna have a go at them soon..... cheers for any more help
Lists of mods:Type VR enclosed induction kit, Corner splitters (front), 15"Alloys Wider than standard wheelies, front and rear strut brace, JBL front speakers, JBL 6x9's, 4-2-1exhaust manifold, Catbacksystem+backbox, Pipercross crankcase breather, alarm system(unkown i forgot!! :(), Bilsein sports kit 40mm allround...
) Do i need some sort of special drill? or just any drill with a special drill piece to go through metal... (AM I MAKING ANY SENSE?!?! lol) All help appreciated!
they\'re Ripspeed ones 
lol (gf bought them for me!! 
)