hi everyone
i just fitted some new Lexus lights to my car.
i got a problem which is driving me mad. one side all the bulbs work fine, the other side most bulbs work but wen it comes to the bulb at the top. the brake/tail light bulb its not working 100%
when my lights are on the drivers side works fine but the passenger side wont. when i brake though they both come on.
Ive checked all the bulbs and even swapped the bulbs over to check but its being stupid. anyone have this problem? please help
lexus lights
Moderator: Octane2097
-
- CB-Uk Newbie
- Posts: 40
- Joined: Sun Aug 14, 2005 5:19 pm
- Location: east sussex
-
- CB-Uk Newbie
- Posts: 44
- Joined: Sat May 07, 2005 5:32 pm
- Location: Sheffield
- Contact:
lexus lights
check your fuses mate, i had the same problem with mine, ended up been a blown fuse after i dismantled all light cluster! hope this helps
Blade4life1889@hotmail.com <<<<<MY MSN, Add Me :-)
-
- CB-Uk User
- Posts: 309
- Joined: Sun Jan 09, 2005 1:47 pm
- Location: Essex
lexus lights
failing that check the bulb, one of the fimilments might have gone,
Freedom is only possibly, thanx to capitalisim
-
- CB-Uk Newbie
- Posts: 40
- Joined: Sun Aug 14, 2005 5:19 pm
- Location: east sussex
lexus lights
cheers mate did the same thing happen to you then? your brakes worked but tail light didn\'t work? so ill look at fuses tomorrow and hopefully its blown,
-
- CB-Uk Newbie
- Posts: 44
- Joined: Sat May 07, 2005 5:32 pm
- Location: Sheffield
- Contact:
lexus lights
ye i thought it was something wrong with the cluster itself but ended up been a 5 amp fuse which had blown! good luck!
Blade4life1889@hotmail.com <<<<<MY MSN, Add Me :-)
-
- CB-Uk User
- Posts: 1367
- Joined: Fri Jun 10, 2005 7:29 pm
- Location: Peterborough
lexus lights
Check you\'re using the correct bulbs (twin filament if needed on some looms) and that all bulbs are fitted snugly.
Check the wiring on the looms to make sure no wires have come loose from the bulb holders.
Failing that, it\'s likely the loom is wired incorrectly. Speak to wherever you bought them from as it\'s a known problem with the imported lights (Ultra\'s used to be the same but I think they\'ve had a load re-wired now).
Check the wiring on the looms to make sure no wires have come loose from the bulb holders.
Failing that, it\'s likely the loom is wired incorrectly. Speak to wherever you bought them from as it\'s a known problem with the imported lights (Ultra\'s used to be the same but I think they\'ve had a load re-wired now).
No more Corsa :(
-
- CB-Uk User
- Posts: 175
- Joined: Wed May 11, 2005 6:16 pm
lexus lights
cud b a fuse
cud b an eliment in the double eliment bulb so check that
and if all elses fails take them back and say there O_o!!
cud b an eliment in the double eliment bulb so check that
and if all elses fails take them back and say there O_o!!
-
- CB-Uk Newbie
- Posts: 40
- Joined: Sun Aug 14, 2005 5:19 pm
- Location: east sussex
lexus lights
yeh thanks for the help guys it was the blody fuse, should of checked it before,thanks for help