Want a quick 8v?

Help and advice section for technical questions on your Corsa.
Please check that your query hasn't already been answered in FAQ and Technical Info section.

Moderator: Octane2097

Post Reply
pct corsa
CB-Uk User
Posts: 199
Joined: Tue Jul 05, 2005 6:16 pm
Location: Leigh Lancashire
Contact:

Want a quick 8v?

Post by pct corsa »

B & J ENGINEERING

0161 748 8663
Joff
CB-Uk User
Posts: 1367
Joined: Fri Jun 10, 2005 7:29 pm
Location: Peterborough

Want a quick 8v?

Post by Joff »

Any more info?
No more Corsa :(
pct corsa
CB-Uk User
Posts: 199
Joined: Tue Jul 05, 2005 6:16 pm
Location: Leigh Lancashire
Contact:

Want a quick 8v?

Post by pct corsa »

[quote=\"Joff\"]Any more info?[/quote] yes m8

put more info on post \"make my car faster\" ref RETRO CAR MAG
kawika
CB-Uk User
Posts: 309
Joined: Sun Jan 09, 2005 1:47 pm
Location: Essex

Want a quick 8v?

Post by kawika »

what do you do? what prices? what increases?

i.e i have a 1.4 8v what can i with it
Freedom is only possibly, thanx to capitalisim
User avatar
purecarsound
CB-Uk User
Posts: 362
Joined: Tue Feb 01, 2005 10:10 am
Location: Milton Keynes
Contact:

Want a quick 8v?

Post by purecarsound »

More info would be nice?
Website no longer live. PM me with make/model for a quote
pct corsa
CB-Uk User
Posts: 199
Joined: Tue Jul 05, 2005 6:16 pm
Location: Leigh Lancashire
Contact:

Want a quick 8v?

Post by pct corsa »

Please note this is not a company I know or work for
most of you seem to go for twinks so found out about this person / company from a mag as rules i run my car in wont allow major mods so i\'m searching for an engine builder to \"blue print\" an 8v for me
Not a Magazine I guess you would buy but there is an artical in Retro cars with a full write up on the 8v engines covering 1.2-2.0 which includes a bit about heads that have the bigger valves heads with best ports
the info comes from an engine builder in manchester who gets 200bhp out of the 2.0 and 150 bhp out of a 1.4 8v! he builds race motors mainly for grasstrack specials using the vauxhall 8v engines but will sell parts that have been made for him for road cars
\"hiswords in conclusion\" knocking on the door of the xe, and lighter ignore the 8v at your peril !
kawika
CB-Uk User
Posts: 309
Joined: Sun Jan 09, 2005 1:47 pm
Location: Essex

Want a quick 8v?

Post by kawika »

did it say how much for 150 out of a 1.4?

don\'t suppose it would be at all reliable though :(
Freedom is only possibly, thanx to capitalisim
pct corsa
CB-Uk User
Posts: 199
Joined: Tue Jul 05, 2005 6:16 pm
Location: Leigh Lancashire
Contact:

Want a quick 8v?

Post by pct corsa »

not really but was webers,cam etc best thing is to ring them
j1400
CB-Uk User
Posts: 277
Joined: Mon May 02, 2005 9:56 pm
Location: Hemel Hempstead

Want a quick 8v?

Post by j1400 »

the 150BHP 1.4 is doable, but you\'ll only have power between 7 and 8.5k and will have a life of 100miles (ish) and cost about the same as it\'s revlimit. Still an awesome engine
pct corsa
CB-Uk User
Posts: 199
Joined: Tue Jul 05, 2005 6:16 pm
Location: Leigh Lancashire
Contact:

Want a quick 8v?

Post by pct corsa »

as you know im erm playing by the rules ! should think will last a bit longer than that though,

i\'m hopeing to get him to blue print the engine i get off you

his heads are about £900 which is about the same as L>A>D and Skip Brown his cams are well expensive but will quizz him about that cos Kent make them for him
j1400
CB-Uk User
Posts: 277
Joined: Mon May 02, 2005 9:56 pm
Location: Hemel Hempstead

Want a quick 8v?

Post by j1400 »

I mean 1000 bad typo.

I can recommned another place to get the head flowed for a much more reasonable price, ;)

Want my 1400 to be knocking on the door of 150 before I swap it, but I have a slight advantage over a 8v motor
pct corsa
CB-Uk User
Posts: 199
Joined: Tue Jul 05, 2005 6:16 pm
Location: Leigh Lancashire
Contact:

Want a quick 8v?

Post by pct corsa »

:rules: keeps me from real power same as mates nova (orange one in my album) he is arranging to take his spare engine to manchester ready for when his other lets go

could you ask for a price on 8v for blue print n balance bottom end at your recomended engineers for me please!
Post Reply