suspension....pls dnt cringe lol
Moderator: Octane2097
-
- CB-Uk Newbie
- Posts: 29
- Joined: Mon May 23, 2005 9:58 pm
suspension....pls dnt cringe lol
rite im have got to make the decision of what to lower my car by. I am going for a gmax kit as it is within my budget an i am going to fit it myself with my dad.
The thing is i know i will be safe dropping it the 40mm but i know if i do that on a full kit and spend the £200 it wont be low enough. If i am to drop the car 60mm will it scrub at all?
i Have cav gsi rims et49 with 195 50 15 rubber on the and wonder if i lower it 60mm will i have to remove any of the bolts from the arch?
thanks for any help !!!
The thing is i know i will be safe dropping it the 40mm but i know if i do that on a full kit and spend the £200 it wont be low enough. If i am to drop the car 60mm will it scrub at all?
i Have cav gsi rims et49 with 195 50 15 rubber on the and wonder if i lower it 60mm will i have to remove any of the bolts from the arch?
thanks for any help !!!
-
- CB-Uk User
- Posts: 61
- Joined: Sat May 14, 2005 10:23 pm
- Location: wirral
- Contact:
suspension....pls dnt cringe lol
with your wheels being the perfect offset for your corsa and decent tyres then you can lower 60mm and have no problem at all, you wont have to do anything to the arches
-
- CB-Uk Newbie
- Posts: 29
- Joined: Mon May 23, 2005 9:58 pm
suspension....pls dnt cringe lol
Wicked thanks for that !!!
will it not even rub with people in the back seats?
will it not even rub with people in the back seats?
-
- CB-Uk User
- Posts: 61
- Joined: Sat May 14, 2005 10:23 pm
- Location: wirral
- Contact:
suspension....pls dnt cringe lol
erm, not to sure, i no that you will defo got one person in the back and you should be able to get two people in the back, might rub if you have two people in the back when going over speed bumps and going round corners fast, just go over speed bumps slow
-
- CB-Uk User
- Posts: 1684
- Joined: Thu Feb 24, 2005 8:23 pm
- Location: Essex
suspension....pls dnt cringe lol
give you an idea, i had 195,45,15 offset of et45 and lowered 50mm on apex springs and 3people could get in with no rubbing, but it was close and they were not fatties
what size wheels tyres have you got?
what size wheels tyres have you got?
-
- CB-Uk Newbie
- Posts: 29
- Joined: Mon May 23, 2005 9:58 pm
suspension....pls dnt cringe lol
i got 15 inch cavvy rims et 49
195 50 15 proxes
jus cross my fingers, may only do a 40mm drop argh i dnt kno. i kno in the end which ever one i do i will say i wish i did the other one.
195 50 15 proxes
jus cross my fingers, may only do a 40mm drop argh i dnt kno. i kno in the end which ever one i do i will say i wish i did the other one.
-
- CB-Uk User
- Posts: 61
- Joined: Sat May 14, 2005 10:23 pm
- Location: wirral
- Contact:
suspension....pls dnt cringe lol
no, believe me, if you do the 40mm, in a couple of weeks youll want it lowered 60mm,
-
- CB-Uk User
- Posts: 1684
- Joined: Thu Feb 24, 2005 8:23 pm
- Location: Essex
suspension....pls dnt cringe lol
yeah go for the 60mm if you want i can almost guarantee you wont have problems, especially with the correct vaux offset (theres always the exception and some springs drop more then others)
-
- CB-Uk Newbie
- Posts: 29
- Joined: Mon May 23, 2005 9:58 pm
suspension....pls dnt cringe lol
im gona go for a gmax kit dunno if that lowers more than usual??
also seen venom motorsport do a kit for £200. any 1 kno is this is gd???
also seen venom motorsport do a kit for £200. any 1 kno is this is gd???
-
- CB-Uk User
- Posts: 277
- Joined: Mon May 02, 2005 9:56 pm
- Location: Hemel Hempstead
suspension....pls dnt cringe lol
remeber to have the tracking checked after it\'s lowered, it normally makes the car mega toe out.
-
- CB-Uk User
- Posts: 150
- Joined: Thu May 26, 2005 8:52 pm
- Location: chester
suspension....pls dnt cringe lol
i have just had my car lowered 60mm on 17\'s and that doesnt rub i just cut a bit more metal off and a bit more off the plastic
faster than sum slower than most!
-
- CB-Uk Newbie
- Posts: 29
- Joined: Mon May 23, 2005 9:58 pm
suspension....pls dnt cringe lol
yea im gona get it laser aligned at a place called elite so its done all proper. i think i will jus be sticking with 40mm as i wont hav any trouble then, may b even 60/40 but i dnt kno any kits that u can buy like that?
-
- CB-Uk Newbie
- Posts: 26
- Joined: Fri Sep 02, 2005 7:00 pm
- Location: GLASGOW
- Contact:
suspension....pls dnt cringe lol
i bought APEX sports kit a few years ago and lowerd it -60mm on 195/45/15\'s.. had no problems whatso ever with it rubbibg..
now its still -60mm but with 205/40/17\'s.. still no rubbing and didnt have to do anything to get em to fit!
only time it ever rubs is if you hit a dip in the road hard or if theres a full load in car..(that never happens tho since a canna use my back seats anyway, thanks to the bucket seats.)
go for the -60mm all over. youll love it!
now its still -60mm but with 205/40/17\'s.. still no rubbing and didnt have to do anything to get em to fit!
only time it ever rubs is if you hit a dip in the road hard or if theres a full load in car..(that never happens tho since a canna use my back seats anyway, thanks to the bucket seats.)
go for the -60mm all over. youll love it!
-
- CB-Uk User
- Posts: 236
- Joined: Thu Apr 14, 2005 10:23 pm
- Location: Buxton Derbyshire NorthWest
suspension....pls dnt cringe lol
I will point out that a 60 mm drop with a front bodykit will catch on some of them new style \"2 lumps in middle of road\" speed bumps!
(I know I managed to half shaft my body kit hitting one)
(I know I managed to half shaft my body kit hitting one)
-
- CB-Uk User
- Posts: 61
- Joined: Wed Jul 27, 2005 1:45 pm
- Location: Southampton
- Contact:
Re: suspension....pls dnt cringe lol
[quote=\"kupo\"]rite im have got to make the decision of what to lower my car by. I am going for a gmax kit as it is within my budget an i am going to fit it myself with my dad.
The thing is i know i will be safe dropping it the 40mm but i know if i do that on a full kit and spend the £200 it wont be low enough. If i am to drop the car 60mm will it scrub at all?
i Have cav gsi rims et49 with 195 50 15 rubber on the and wonder if i lower it 60mm will i have to remove any of the bolts from the arch?
thanks for any help !!! [/quote]
Kupo mate if your after some springs im selling my g-max springs for 40 quid on ebay>>>>>
http://my.ebay.co.uk/ws/eBayISAPI.dll?M ... :LNLK[url]
The thing is i know i will be safe dropping it the 40mm but i know if i do that on a full kit and spend the £200 it wont be low enough. If i am to drop the car 60mm will it scrub at all?
i Have cav gsi rims et49 with 195 50 15 rubber on the and wonder if i lower it 60mm will i have to remove any of the bolts from the arch?
thanks for any help !!! [/quote]
Kupo mate if your after some springs im selling my g-max springs for 40 quid on ebay>>>>>
http://my.ebay.co.uk/ws/eBayISAPI.dll?M ... :LNLK[url]