FAO bockfinkle

[robmarriott]

sorry its not in your post, i was having a blond moment!!

right, firstly, get yourself a decent exhaust system and manifold, a new inlet manifold, like the mantzel or lexmaul, cams up to 264 degrees should be ok, and if mapped properly will make a bit of difference, but as J1400 says, if you want silly power gains, you need silly cams, and therefore clearance is a problem, get the engine mapped for all of the bits and get a ported and polished head

then strip it, as it\'ll make the car far quicker, i\'ve lost over 120kg from mine by removing various crap

flywheel will make a hell of a difference, it makes the engine rev more easily, and is well worth the money

with cams, headwork, manifold, decat, inlet and exhaust, you should get about 120bhp

stick a 1.6 in, it\'ll work out cheaper, the power will be up on what you have now, and the torque is better too

[Joff]

Robin, why make a seperate post? Delete this thread and post it on bockfinkles thread or U2U it.

Don\'t start random orphaned threads like this!

[bockfinkle]

cheers matey. help much appreciated.