suspension query
Moderator: Octane2097
-
- CB-Uk User
- Posts: 216
- Joined: Wed Jun 01, 2005 11:46 pm
- Location: Darlington
suspension query
Right, if i purchase a suspension package that comes with uprated shocks and some -40mm springs, can i change the springs and put -60mm ones on instead.....???
It says in the advert that the front can be lowered either 40mm or 60mm, and the back is fixed at 40mm..... just curious if i can change the back springs to make it 60mm all round....???
I have not got a clue about this, im stupid i know
It says in the advert that the front can be lowered either 40mm or 60mm, and the back is fixed at 40mm..... just curious if i can change the back springs to make it 60mm all round....???
I have not got a clue about this, im stupid i know
-
- CB-Uk User
- Posts: 276
- Joined: Wed Aug 24, 2005 7:35 pm
- Location: Northampton
suspension query
i really have no clue either, but i imagine you could have 60mm all round as it is possible to put 60mm springs on standard shocks alone. So just a guess but i imagine putting them on the uprated shocks would be fine?
-
- CB-Uk User
- Posts: 1367
- Joined: Fri Jun 10, 2005 7:29 pm
- Location: Peterborough
suspension query
Yes, the general rule is you can swap over springs.
Some shock absorbers are uprated and shortened to match the spring, but I don\'t think anyone does these for the Corsa any more.
Some shock absorbers are uprated and shortened to match the spring, but I don\'t think anyone does these for the Corsa any more.
No more Corsa :(
-
- CB-Uk User
- Posts: 277
- Joined: Mon May 02, 2005 9:56 pm
- Location: Hemel Hempstead
suspension query
You can do that no problem, but using -60mm springs on std shocks is asking for touble.
-
- CB-Uk User
- Posts: 276
- Joined: Wed Aug 24, 2005 7:35 pm
- Location: Northampton
suspension query
i think my mate had 60mm drop on his standard punto about 4 years ago. And it was terrible - bottomed out and hurt ya\'ass real bad!
-
- CB-Uk User
- Posts: 216
- Joined: Wed Jun 01, 2005 11:46 pm
- Location: Darlington
suspension query
So, using -60mm springs on std shocks is a no no...... but if get these uprated shocks then i can put new -60mm springs on them, even though they only came with -40mm ones....???
There GAS shocks i think, but then the advert says something about FK as well...... and doesnt tell you the make of the springs......
There GAS shocks i think, but then the advert says something about FK as well...... and doesnt tell you the make of the springs......
-
- CB-Uk Newbie
- Posts: 31
- Joined: Fri Sep 23, 2005 12:28 am
- Location: merseyside
suspension query
why not just get a set of gmax, which come at 60mm alround anyway. thats what im running on and its a good setup, bit bumper....but whta do you expect.
-
- CB-Uk User
- Posts: 197
- Joined: Sat Sep 17, 2005 8:18 pm
suspension query
Most -60mm kits will come with shortened shocks to stop it bottoming out.
The ride comfort will terrible with low springs and standard shocks.
The ride comfort will terrible with low springs and standard shocks.
-
- CB-Uk Newbie
- Posts: 31
- Joined: Fri Sep 23, 2005 12:28 am
- Location: merseyside
suspension query
that gmax kit im on is springs and shocks
-
- CB-Uk User
- Posts: 216
- Joined: Wed Jun 01, 2005 11:46 pm
- Location: Darlington
suspension query
Ive heard lots of bad things about G-max suspension and been told to go for FK, AVO to name but a few
-
- CB-Uk Newbie
- Posts: 31
- Joined: Fri Sep 23, 2005 12:28 am
- Location: merseyside
suspension query
dont know. but mine is fine. took a fair bit of punishment (dodgy road surfaces and driving it hard) and they have been fine.
-
- CB-Uk User
- Posts: 197
- Joined: Sat Sep 17, 2005 8:18 pm
suspension query
IMO AVO are ace!!